tender for provision of certain minor and revenue works under age b/r-i at ge gurdaspur.= 1 excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as specified and directed. 2 removal of excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 3 m&l for pcc 1:3:6 type c-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. 4 s&f of rolled mild steel gde fe-410-w gde e-250 quality-a in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails, fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc complete all as specified and directed by engr-in-charge. 5 m&l for preparation of steel surfaces upto and over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 6 s&f pre-painted galvalume aluminium zinc coating gi based corrugated coloured steel sheet 0.50 mm thick having tensile strength of 550 mpa as in roof covering fixed with self tapping screws complete all as specified and directed. 7 s&f pre- painted galvalume aluminum zinc coating gi based corrugated steel coloured sheet 0.50mm thick having tensile strength of 550 mpa as in cladding to wall, fixed with self tapping screws complete all as specified & directed. 8 surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. 9 m&l for 100mm thick pcc 1:4:8 type d-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed 10 m&l for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m-35 grade with approved, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness and size/ shape, made by table vibratory method using pu mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. 11 m&l for cement concrete 1:2:4 type b-0 (using 12.5mm graded crushed stone aggregate) as in coping and chamfered for edges complete all as specified and directed. 12 m&l for brick work with sub class b bricks (old size) straight curved on plan exc 6m mean radius built in cm 1:4 all as specified and as directed. 13 m&l for preperation of new plastered/ unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed. 14 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as directed.