tender for provision of shed at various locations at af stn phalodi; 1 excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed. 2 m&l for pcc (1:2:4)type b-2 using 40 mmgraded aggregate as in foundations, filling and mass concrete complete all as specified and directed. 3 m&l for steel work in tubular truess including special shaped washer etc complete using erw or induction butt welded tubes conforming to is 1161-1979 grade st 240 complete all as specified and directed. 4 m&l for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed. 5 s&f pre-painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.5mm thick of sandy colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 6 surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed. 7 m&l for cement concrete 100 mm thick type d2 (1:4:8) using 40 mm graded aggregate as in sub base for path/ flooring of stone aggregate complete all as specified and directed. 8 m&l for 25 cm to 30 cm thick sand filling under floors or in foundation inclding watering and consolidation complete all as specified and directed.note: punned thickness shall be measured for payment purpose. 9 m&l for machine pressed precast concrete interlockingpaver block factory casted any shape and size conforming tois 15658-2006 of80mmthickness, m-40gradeof cement concrete with grey cementand pigment complete all as specified and directed.