tender for construction of two new classrooms at zpps pabe tal velha dist pune - providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel).with fully automatic micro processor based plc withoutscada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade finely washed )....(ino25-31 ns, pgno 179) ( state dsr ) item spec: (bd.f.5 page no. 300 and b.7, page.no. 38) & (ra no. : 1) 2 item no. : 2 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc withoutscada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade finely washed )....(ino25-50 ns, pgno 181) ( state dsr ) item spec: (bd.f.6 page no. 300 and b.7, page no.38) & (ra no. : 2) 3 item no. : 3 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc withoutscada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade finely washed )....(ino25-70 ns, pgno 182) ( state dsr ) item spec: (bd.f.8 page no. 302 and b.7, page no.38) & (ra no. : 3) 4 item no. : 4 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc withoutscada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade finely washed)....(ino26-05 ns, pgno 184) ( state dsr ) item spec: (bd.f.9 page no. 303 and b.7, page no.38) & (ra no. : 4) 5 item no. : 5 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(ino26-33, pgno 188) ( state dsr ) item spec: (bd.f.17, page no. 306) & (ra no. : 5) 6 item no. : 6 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete....(ino27-05, pgno 197) ( state dsr ) item spec: (bd.g.5 page no. 315) & (ra no. : 6) 7 item no. : 7 providing and fixing frame with / without ventilator of size as specified with country cutteak woodfor doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete....(ino39-01 , pgno 245) ( state dsr ) item spec: (as directed by engineer in charge.) & () 8 item no. : 8 providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per is 14856 (2000) (reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.....(ino39-59 , pgno 258) ( state dsr ) item spec: (as directed by engineer-in-charge.) & () 9 item no. : 9 providing and fixing in position (as per 1868 / 1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/rmt.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/rmt. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/rmt. as per detailed drawings and as directed by engineer-in-charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete.with powder coating without box....(ino39-44 , pgno 254) ( state dsr ) item spec: (as directed by engineer-in-charge.) & () 10 item no. : 10 providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.....(ino40-02 , pgno 264) ( state dsr ) item spec: (bd.u.1 page no. 537) & () 11 item no. : 11 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.....(ino32-04, pgno 209) ( state dsr ) item spec: (bd. l.2 page no. 368) & (ra no. : 7) 12 item no. : 12 providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.....(ino32-27 , pgno 210) ( state dsr ) item spec: (as directed by engineer in charge.) & () 13 item no. : 13 providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.....(ino32-15 , pgno 210) ( state dsr ) item spec: (bd. l.10, page no.370) & () 14 item no. : 14 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(ino32-11, pgno 209) ( state dsr ) item spec: (bd.l.7 page no. 369) & (ra no. : 8) 15 item no. : 15 providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on c.m. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete.....(ino33-48 , pgno 218) ( state dsr ) item spec: (bd. m. 12) & () 16 item no. : 16 providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming is. 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) flooring....(ino33-42, pgno 217) ( state dsr ) item spec: (bd.m.12 page no. 385) & (ra no. : 9) 17 item no. : 17 providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming is. 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) skirting....(ino33-43, pgno 217) ( state dsr ) item spec: (bd.m.12 page no. 385) & (ra no. : 10) 18 item no. : 18 providing and laying in position flooring of telephone black / amba white / cat bary brown / rubyred / ocean brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in c.m. 1:3 curing and cleaning etc. complete.....(ino33-34, pgno 216) ( state dsr ) item spec: (bd.m. 3 b/page no. 380) & (ra no. : 11) 19 item no. : 19 providing and fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (prior approval of sample and brand by ex.engineer is necessary before use)….....(ino40-08 , pgno 265) ( state dsr ) item spec: (as directed by engineer incharge) & () 20 item no. : 20 providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.....(ino33-66, pgno 220) ( state dsr ) item spec: (bd. m-12 page no. 385) & (ra no. : 12) 21 item no. : 21 providing cement based water proofing treatment to terraces (indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in c.m.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with c.m.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years guarantee against leakproofness on court fee stamp paper of rs. 500/- including ponding test etc. complete.....(ino31-04, pgno 205) ( state dsr ) item spec: (as directed by engineer in charge.) & (ra no. : 13) 22 item no. : 22 providing and applying priming coat on concrete/ masonary/ asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.....(ino35-21 , pgno 225) ( state dsr ) item spec: (as directed by engineer in charge.) & () 23 item no. : 23 providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.....(ino36-14 , pgno 228) ( state dsr ) item spec: (bd.p.6 page no. 414 & pre-approval of superintending engineer) & () 24 item no. : 24 providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding i.s. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.....(ino35-25 , pgno 225) ( state dsr ) item spec: (as directed by engineer in charge.) & () 25 item no. : 25 providing learning aids in weather shield paint to walls of school building including providing and applying two coats of exterioor weather shield paint of approved manufacture and of approved colour to plastered surface including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days etc complete....(ino1-1 , pgno 801) ( state dsr ) item spec: (as directed by engineer incharge) & () 26 item no. : 26 providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge....(ino6-36 , pgno 60) ( state dsr ) item spec: (morth 801) & () 27 item no. : 1 mortor compressive strength.( set of 3 cubes)....(ino27-vqc , pgno 585) ( state dsr ) item spec: (as per standard specification) & () 28 item no. : 2 concrete compressive strength of c.c. cube(set of 3 cubes).....(ino19-vqc , pgno 584) ( state dsr ) item spec: (as per standard specification) & () 29 item no. : 3 bricks water absorption (set of 5 bricks), compressivestrength( set of 5 bricks), efflorescence (set of 5 bricks).....(ino13-vqc , pgno 584) ( state dsr ) item spec: (as per standard specification) & () 30 item no. : 4 steel bar testing upto 16 mm(set of 3 bars)....(ino72-vqc , pgno 586) ( state dsr ) item spec: (as per standard specification) & () 31 item no. : 5 basic test of aggregate. water absorption, specific gravity.impact value crushing value.....(ino2-vqc , pgno 584) ( state dsr ) item spec: (as per standard specification ) & ()