providing repairs works at zpps lonikalbhor no,02 tal haveli dist pune- 1 item no. : 1 removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.....(ino46-19 , pgno 297) ( state dsr ) item spec: (as directed by engineer in charge) & () 2 item no. : 2 removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.....(ino46-15 , pgno 296) ( state dsr ) item spec: (as directed by engineer in charge.) & () 3 item no. : 3 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc withoutscada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate ( crushed sand vsi grade finely washed )....(ino24-01 ns, pgno 175) ( state dsr ) item spec: (bd. e. 1 page no. 287) & (ra no. : 1) 4 item no. : 4 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(ino32-11, pgno 209) ( state dsr ) item spec: (bd.l.7 page no. 369) & (ra no. : 2) 5 item no. : 5 providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with french polish etc. complete.....(ino39-09 , pgno 246) ( state dsr ) item spec: (bd-t-34, page no. 499) & () 6 item no. : 6 providing and fixing in position (as per 1868 / 1982) alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/rmt.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/rmt. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/rmt. as per detailed drawings and as directed by engineer-in-charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with colour anodising with box....(ino39-41 , pgno 253) ( state dsr ) item spec: (as directed by engineer-in-charge.) & () 7 item no. : 7 providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.....(ino40-02 , pgno 264) ( state dsr ) item spec: (bd.u.1 page no. 537) & () 8 item no. : 8 providing and laying polished tandur stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 c.m. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.....(ino33-05, pgno 213) ( state dsr ) item spec: (bd.m.3 page no. 380) & (ra no. : 3) 9 item no. : 9 providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming is. 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) flooring....(ino33-42, pgno 217) ( state dsr ) item spec: (bd.m.12 page no. 385) & (ra no. : 4) 10 item no. : 10 providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming is. 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) skirting....(ino33-43, pgno 217) ( state dsr ) item spec: (bd.m.12 page no. 385) & (ra no. : 5) 11 item no. : 11 providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on c.m. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete.....(ino33-48 , pgno 218) ( state dsr ) item spec: (bd. m. 12) & () 12 item no. : 12 providing and laying in position flooring of telephone black / amba white / cat bary brown / rubyred / ocean brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in c.m. 1:3 curing and cleaning etc. complete.....(ino33-34, pgno 216) ( state dsr ) item spec: (bd.m. 3 b/page no. 380) & (ra no. : 6) 13 item no. : 13 providing and fixing 40mm diameter and 1.5mm thick stainless steel hand railing in s.s.304 grade including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete....(ino40-06 , pgno 264) ( state dsr ) item spec: (as directed by engineer incharge) & () 14 item no. : 14 providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.....(ino36-11 , pgno 227) ( state dsr ) item spec: (bd.p.5 page no. 413) & () 15 item no. : 15 providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.....(ino36-14 , pgno 228) ( state dsr ) item spec: (bd.p.6 page no. 414 & pre-approval of superintending engineer) & () 16 item no. : 16 providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding i.s. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.....(ino35-25 , pgno 225) ( state dsr ) item spec: (as directed by engineer in charge.) & () 17 item no. : 17 providing and applying two coats of weather shield paint for pictures / graphics and lettering as a learning aids on the walls of school building ( which is previously painted with weather shield paint ) including skilled painter / artist / helpers, necessary scaffolding and watering the surface for two days etc complete. ( rate shall be inclusive of two coats of weather shield paint on plastered surface )....(ino1- , pgno 801) ( state dsr ) item spec: (as directed by engineer incharge) & () 18 item no. : 18 providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge....(ino6-36 , pgno 60) ( state dsr ) item spec: (morth 801) & () 19 item no. : 1 mortor compressive strength.( set of 3 cubes)....(ino27-vqc , pgno 585) ( state dsr ) item spec: (as per standard specification ) & () 20 item no. : 2 concrete compressive strength of c.c. cube(set of 3 cubes).....(ino19-vqc , pgno 584) ( state dsr ) item spec: (as per standard specification ) & () 21 item no. : 3 ceramic tiles / vitrified tiles water absorption, moduls of rapture (set of 6 tiles)....(ino16-vqc , pgno 584) ( state dsr ) item spec: (as per standard specification ) & () 22 item no. : 4 aluminium section thickness, mass per running meter,....(ino63-vqc , pgno 586) ( state dsr ) item spec: (as per standard specification ) & ()