tender for maintenance of amma unavagam at thatchanallur in ward no : 13- 1 dismantling the damaged tiles including all cost and convenyance at materials to site and all labours charges etc., complete. 2 dismantling the damaged pcc 1:4:8 including all cost and convenyance at materials to site and all labours charges etc., complete. 3 earthwork excavating and depositing on bank with an initial lead of 10m & initial liftm of 2m, in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size bouiders and hard gravelly soil asper standard specification 20 b including refilling charges. 4 plain cement concrete 1:4:8 mix using 40 mm iss size hbg metal from approved quality including all cost of materials of site all labour charges and conveyance etc., complete as per standard specification. 5 brick work in the cement mortar 1:5 ( one cement five sand) mix using well burnt country bricks of size 8 ¾” x 4 ¼” x2¾” from approved quarry including all cost and conveyance of materials to site and all labours charges etc., complete as per standard specification. 6 plastering with c.m. 1:5 (one cement and five sand) 12mm thick including all cost of materials and labour charges etc. complete. 7 plastering with c.m. 1:4 (one cement and four sand) 20mm thick including all cost of materials and labour charges etc. complete. 8 paving the floor with double charged vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one part of cement and three part of plastering sand (p- sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. the colour & quality of tiles should be got approved by municipal engineer before use on work 9 dadooring the walls with glazed square tiles of 150mm x 150mm x 6mm of the following colour set in cement mortar 1:2 ( one cement two sand) with white cement @ 0.4kg/m2 neatly in all floors as directed etc., complete 10 supplying and fixing of ms iron door with iron angles including all cost and conveyance all materials to the site and all labour charges etc. complete 11 painting two coats with approved interior and exterior emulsion paint over cement plastered wall surfaces, ceiling and other new surfaces including cleaning preparing the surface and curing etc., complete as per standard specification 12 painting two coats with best quality enamel paint over old iron work including all cost of material and labour charges etc, complete 13 wiring with 2x1.5sqmm pvc unsheated sc.alu.cable of 1100v grade with sutable pvc riged pipe on wall and ceiling with accessories and tw switch box and 5a f.t switch in flush withwall 3mm thick hylum sheet cover for making good of the concealed portion with painting of sutable colour and continues earthwire connection of 19 swg tc wire for concealed pvc light point /fan point (sd 1) 14 wiring with 2x1.5sqmm pvc unsheated sc.alu.cable of 1100v grade with sutable pvc riged pipe concealed on wall and ceiling with accessories and in flush with wall with 150mm x 100mm x113mm tw switch box and 5a f.t switch in flush withwall 3mm thick hylum sheet cover for making good of the concealed portion with painting of sutable colour and continues earthwire connection of 14 swg tc wire for concealed pvc plug point (sd 38) 15 supplying and fixing of single box type 440 w flu fitting complete with electronic ballast with tw round block on wall or ceiling with flutube pvc unsheathed copper leads from terminal to the fitting (sd 88) 16 supply and fixing of 1200mm (48\) sweep ac ceiling fan complete with stepped electronic 300w regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18\) (sd 106) 17 supplying and following pipes and specials 18 20mm g.i gate valve 19 20mm g.i pipe b.class 20 20mm g.i coupling 21 20mm g.i ellbow 22 20mm g.i union 23 20mm g.i hex nipple 24 15mm sd tap 25 solventcement 26 110mm pvc pipe 27 110mm pvc tee 28 110mm pvc bend 29 110mm pvc elbow 30 1000 litre pvc tank