tender for special ceiling plastering and finishing the exposed surfaces of all reinforced cement concrete items of works with cement mortar 1:3 (one cement and three sand) of 12 mm thick including hacking the surface and providing necessary cement mortar nosing, beading as per size and specification wherever necessary using the same mix in all floors etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification. , plastering in cement mortar 1:5 mix (one cement and five sand) of 12 mm thick etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification. , paving the top of roof with solar reflective ceramic tiles (required design) of 305x305x7mm thick of approved quality and collour laid in cement mortar 1:3 (one cement and three m sand) 12mm thick and pointed with tile grout (nitotile) grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc, complete complying with standard specification as directed by the departmental officers. (the make and brand of the tiles should be got approved by executive engineer before use on works) , flooring with cement based hydraulically pressed anti skid tiles (pattern design) 20 mm thick of approved colour and quality of required size laid over cement mortar 1:3 mix (one cement and three sand) of 20mm thick including cutting the tiles to the required the size, pointing with the same coloured cement mortar, all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification. , dadooing walls with following best approved quality, white / colour glazed tiles conforming to is 15622 of 300x200x6 mm sizes in cement mortar 1:2 (one cement and two crushed stone sand),10 thick with mortar plasticizer and pointing the joints with water resistant tile epo