supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm +/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place while paint applications inside the painting booth where automated spray painting operations are carried out using high pressure spray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as s le for conducting suitability tests. , self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coat ed with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm +/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capa ble of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertic al position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tap e and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the t ape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place while paint applications inside the painting booth where automated spray painting operations are carried out using high pressure spray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condi tion 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]