tender for (a) supply part-11/.4 kv 400 kva distribution sub station , 11/.4 kv 400kva dtr (rec sep. ord 11/1976 , providing st pole pole 9 mtr. long w/l 220kgs , muff for steel tubular pole with concrete filling , x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line , ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ) , x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch , x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed , x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer] , ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no. , ms angle iron (35x35x5 mm), length : 460 mm x 2 nos , ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing , ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly , g.i. wire for earthing , ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly , g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly , g.o ab switch unit (11kv,400,663ka) tripple pole o/d type , d.o fuse unit , surge arrester, 9 kv station class , discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.) , stay set complete , stay wire (7/3.15mm)( 10 kg per stay set) , pipe earthing with gi,charcoal & salt , providing lt distribution panel with acb (630 a, 50 ka, 4p,1 no.) & sfu (100 a 6 no. rewireble) for 400kva trf. as per specification , half clamp (m.s. flat 50x6) , full clamps (m.s. flat 50x6) , m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) , aluminium thimbles 300 mm sq. , copper thimble 95 mm sq. , danger plate , barbed wire (rec sp f 3/1981) , lt cable 3-1/2 core-400 mm sq.for incomer , lt cable 3-1/2 core-185mm sq.x6 o/g , alluminium paint , prov.acsr, 6/1/3.35 mm , chain link fencing , angle iron, gate etc. for transfromer fencing , providing transformer bed plinth for 1x400kva s/stn structure complete with cement concrete 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing. , lt switched capacitors 50 kvar for 400 kva t/f , hp monochrome laser printer (a4) hp laser 108a with prints up to 20 ppm, 64 mb ram 600x600 dpi print resolution 150 sheets paper tray caapcity usb 2.0 port -one year warranty , (a) erection part-11/.4 kv 400 kva distribution sub station , 11/.4 kv 400kva dtr (rec sep. ord 11/1976 , providing st pole pole 9 mtr. long w/l 220kgs , muff for steel tubular pole with concrete filling , x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line , ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ) , x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch , x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed , x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer] , ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no. , ms angle iron (35x35x5 mm), length : 460 mm x 2 nos , ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing , ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly , g.i. wire for earthing , ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly , g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly , g.o ab switch unit (11kv,400,663ka) tripple pole o/d type , d.o fuse unit , surge arrester, 9 kv station class , discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.) , stay set complete , stay wire (7/3.15mm)( 10 kg per stay set) , pipe earthing with gi,charcoal & salt , providing lt distribution panel with acb (630 a, 50 ka, 4p,1 no.) & sfu (100 a 6 no. rewireble) for 400kva trf. as per specification , half clamp (m.s. flat 50x6) , full clamps (m.s. flat 50x6) , m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) , aluminium thimbles 300 mm sq. , copper thimble 95 mm sq. , danger plate , barbed wire (rec sp f 3/1981) , lt cable 3-1/2 core-400 mm sq.for incomer , lt cable 3-1/2 core-185mm sq.x6 o/g , alluminium paint , prov.acsr, 6/1/3.35 mm , chain link fencing , angle iron, gate etc. for transfromer fencing , providing transformer bed plinth for 1x400kva s/stn structure complete with cement concrete 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing. , lt switched capacitors 50 kvar for 400 kva t/f , hp monochrome laser printer (a4) hp laser 108a with prints up to 20 ppm, 64 mb ram 600x600 dpi print resolution 150 sheets paper tray caapcity usb 2.0 port -one year warranty , (b) supply part-ct/pt unit 400 kva trf. (1 nos.) , providing 11kv ct-pt unit ct/pt combined unit 11 kv /110v 50/5 a , prov, energy meter (3 phase, 4 wire) ht ct type for above , pvc multistrand 2.5 mm sq. copper wire , 1 inch dia gi pipe for concealin , bend joints /elbow , x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 2 nos] for supporting main channel for ct-pt unit , ms angle iron (50x50x5 mm), length : 2800mmx 4 nos. , ms angle iron (35x35x5 mm), length : 2800mmx 2 nos. , half clamp (ms flat 50x6 mm) , full clamp (ms flat 50x6 mm) , nut & bolts off size , aluminium thimble , copper thimble , (b) erection part-ct/pt unit 400 kva trf. (1 nos.) , providing 11kv ct-pt unit ct/pt combined unit 11 kv /110v 50/5 a , prov, energy meter (3 phase, 4 wire) ht ct type for above , pvc multistrand 2.5 mm sq. copper wire , 1 inch dia gi pipe for concealin , bend joints /elbow , x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 2 nos] for supporting main channel for ct-pt unit , ms angle iron (50x50x5 mm), length : 2800mmx 4 nos. , ms angle iron (35x35x5 mm), length : 2800mmx 2 nos. , half clamp (ms flat 50x6 mm) , full clamp (ms flat 50x6 mm) , nut & bolts off size , aluminium thimble , copper thimble , (c) supply part-new ht line (2.43 kms. with acsr 6/1/3.35 mm sq. on steel poles , acsr 6/1/3.35 (rabbit) {includes 3 conductor lengths for 3φ and additional 1% (sag, jumpering and wastage} , providing st pole pole 11 mtr. long w/l 227 kgs/m2 (with ruling span 90m, 8 no. run through and 3 no. double pole dead end structure , providing st pole pole 9 mtr. long w/l 200 kgs , muff for steel tubular pole (2000mm long) with concrete filling , cross arm: [channel iron (100x50x6 mm), length 1270 mm (i/c tolerence of 100mm either side) x2 structure( run through structure (formation tringle) , angle iron (50x50x5 mm), length (2x750) mm x 1 structures (run through structure (formation tringle) , pole top bracket [msci:100x50x6mm-100mm] , 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure (run through structure (formation tringle) , belt set - ms angle iron: 50x50x6, length [1800 mm x 2 no.]for dead end structures , x-bracing set - ms angle iron: 50x50x6, length [2125 mm x2 no.] for dead end structures , x-arm(horizental) - ms c. iron: 50x50x6, length [2340 mm x2 no.]for dead end structures , discs insulator sets on dead end structures (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.) x (3 no. conductors) x (2 no. sides)for dead end structures , 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure for dead end structures , stay set complete in all respect i/c clamp ( single pole-1no. , /d. pole structures-4nos.) , stay wire (7/3.15 mm) (9.0 kg per stay set) , g.i. wire , eye hook for earth wire , earth wire clamp , ht earthing set complete (rec construction standared j-1) , half clamp (on d/p dead end str:2nos. on t/p dead end string 1 nos ; on run through strengthening 3nos.) , full clamp (on d/p dead end str:2nos. on t/p dead end string 1 nos ; on run through strengthening 3nos.) , danger plate (250x200x1.6 mm) , m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) , barbed wire (rec sp f 3/1981) , g.o ab switch unit (11kv,630 a,25ka) , d.o fuse unit , m.s. c.i. 2400 mm for road crossing (75x40x6mm) , alluminium paint , (c) erection part-new ht line (2.43 kms. with acsr 6/1/3.35 mm sq. on steel poles , acsr 6/1/3.35 (rabbit) {includes 3 conductor lengths for 3φ and additional 1% (sag, jumpering and wastage} , providing st pole pole 11 mtr. long w/l 227 kgs/m2 (with ruling span 90m, 8 no. run through and 3 no. double pole dead end structure , providing st pole pole 9 mtr. long w/l 200 kgs , muff for steel tubular pole (2000mm long) with concrete filling , cross arm: [channel iron (100x50x6 mm), length 1270 mm (i/c tolerence of 100mm either side) x2 structure( run through structure (formation tringle) , angle iron (50x50x5 mm), length (2x750) mm x 1 structures (run through structure (formation tringle) , pole top bracket [msci:100x50x6mm-100mm] , 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure (run through structure (formation tringle) , belt set - ms angle iron: 50x50x6, length [1800 mm x 2 no.]for dead end structures , x-bracing set - ms angle iron: 50x50x6, length [2125 mm x2 no.] for dead end structures , x-arm(horizental) - ms c. iron: 50x50x6, length [2340 mm x2 no.]for dead end structures , discs insulator sets on dead end structures (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.) x (3 no. conductors) x (2 no. sides)for dead end structures , 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure for dead end structures , stay set complete in all respect i/c clamp ( single pole-1no. , /d. pole structures-4nos.) , stay wire (7/3.15 mm) (9.0 kg per stay set) , g.i. wire , eye hook for earth wire , earth wire clamp , ht earthing set complete (rec construction standared j-1) , half clamp (on d/p dead end str:2nos. on t/p dead end string 1 nos ; on run through strengthening 3nos.) , full clamp (on d/p dead end str:2nos. on t/p dead end string 1 nos ; on run through strengthening 3nos.) , danger plate (250x200x1.6 mm) , m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) , barbed wire (rec sp f 3/1981) , g.o ab switch unit (11kv,630 a,25ka) , d.o fuse unit , m.s. c.i. 2400 mm for road crossing (75x40x6mm) , alluminium paint , (d) supply part-three phase lt line with aaac 6/1/3.35 mm sq. on steel poles(0.830 km) 3-phase 4 wire double circuit line , acsr 6/1/3.35 (rabbit) {includes 3 conductor lengths for 3φ and additional 1% (sag, jumpering and wastage} , providing st pole pole 9 mtr. long w/l 200 kgs , muff for steel tubular pole , shackle insulators (16kn) (recd-3/761)(iss no 1445/1977) , d-iron (u-clamp) (recd-4/79)(iss no 7935/1975) , lt saty set complete rec no 31/1983 , stay wire (7/3.15 mm) (8.0 kg per stay set) , providing full clamp , earthing set , g.i.wire no 8 swg earth wire 1.03km (sep.g-2/72) for suporting cable , m.s.nuts & bolt off sizes , c.i. 75x40x6mm (length 2400x2 mm) for centilever double circuit line , aluminium paint , (d) erection part-three phase lt line with aaac 6/1/3.35 mm sq. on steel poles(0.830 km) 3-phase 4 wire double circuit line , acsr 6/1/3.35 (rabbit) {includes 3 conductor lengths for 3φ and additional 1% (sag, jumpering and wastage} , providing st pole pole 9 mtr. long w/l 200 kgs , muff for steel tubular pole , shackle insulators (16kn) (recd-3/761)(iss no 1445/1977) , d-iron (u-clamp) (recd-4/79)(iss no 7935/1975) , lt saty set complete rec no 31/1983 , stay wire (7/3.15 mm) (8.0 kg per stay set) , providing full clamp , earthing set , g.i.wire no 8 swg earth wire 1.03km (sep.g-2/72) for suporting cable , m.s.nuts & bolt off sizes , c.i. 75x40x6mm (length 2400x2 mm) for centilever double circuit line , aluminium paint