tender for acsr 6/1/3.35 (50mm²) {includes 3 conductor lengths for 3f and inclusive 3% (sag, jumpering and wastage} , 11m steel tublar pole (11 m, working load 227 kgf/m²) (with ruling span 90 m, 8 no. run thro and 3 no. double pole dead end structures) , muffs with concerete filling , cross arm: [channel iron (100x50x6 mm), length: 1525 mm i/c tolerance of 100 mm either side) x 8 structure , angle iron (50x50x6 mm), length: 750 mm x 2 no. x 8 structures , pole top bracket [msci:100x50x6 mm- 100 mm] , 22 kv pin insulators with gi pin(porcelain, 24 kv, 10 kn): 3 no per pole structure , belt set - ms angle iron: 50x50x6, length :1800 mm x 2 no. , x-bracing set - ms angle iron: 50x50x6, length: 2125 mm x 2 no. , x-arm (horizontal) - ms channel iron: 100x50x6, length: 2340 mm x 2 no.] ? formation , discs insulator sets on dead end structures (comprising 1 no. disc: ^^(porcelain, bs, 24 kv, 90 kn) including dead end clamps etc.) x (3 no. conductors) x (2 no. sides) , 22 kv pin insulators (porcelain, 24 kv, 10 kn): 3 no per double pole structure , stay set complete in all respect (1no. / single pole , 4 no. / double pole structures) , stay wire (7/3.15 mm) (10.0 kg per stay set) , ht earthing set complete (rec construction stand. j-1) , single continous earth wire (gi, 8 swg) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and additional 1% (sag and wastage)} @ 0.102 kg/m , cross lacings (gi, 8 swg) [ 2.2 m x 9 nos @ 2 m spacing] {0.102 kg/m} , eye hook for earth wire , earth wire clamp , ms channel iron: 75x40x6, length : 2400 mm for road crossing , half clamps: [on double pole dead end structure: 4 no; on run thro structure: 2 no ] , full clamps: [on double pole dead end structure: 4 no, single pole run thro structure: 2 no] , danger plate , nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm f or more (with flat and spring washers)] , barbed wire , red oxide , aluminium paint , go switch handle supporting: [channel iron (75x40x6 mm), le