tender for acsr 6/1/3.35 (50mm²) and inclusive 3% (sag, jumpering and wastage} , 11m steel tublar pole (11 m, working load 227 kgf/m²) , muffs with concerete filling , cross arm: [channel iron (100x50x6 mm), length: 1270 mm i/c tolerance of 100 mm either side) , angle iron (50x50x6 mm), length: 750 mm , pole top bracket [msci:100x50x6 mm] , 11 kv pin insulators with gi pin(polymeric, (12 kv, 5 kn) , belt set - ms angle iron: 50x50x6, length :1800 mm , x-bracing set - ms angle iron: 50x50x6, length: 2125 mm , x-arm (horizontal) - ms channel iron: 100x50x6, length: 2340 mm , discs insulator sets on dead end structures^^(polymer, , bs, 12 kv, 90 kn) , stay set complete in all respect , stay wire (7/3.15 mm) , ht earthing set complete , single continous earth wire (gi, 8 swg) @0.102/kg/m , cross lacings (gi, 8 swg) [ 2.2 m x 9 nos @ 2 m spacing] {0.102 kg/m} , eye hook for earth wire , earth wire clamp , ms channel iron: 75x40x6, length : 2400 mm for road crossing , half clamps , full clamps , danger plate , nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm f or more (with flat and spring washers)] , barbed wire , red oxide , aluminium paint , go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm , go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type erection part , erection of st pole 11 mtr long (single pole) digging of pit,filling of pit and ramming,fixing of insulator,x-bracing set ,x-arms,knee bracing set ,drilling of holes in x-bracing set,x-arms, fixing of barbed wire and erection of pole. , erection of st pole 11 mtr long (double pole) digging of pit,filling of pit and ramming,fixing of insulator,x-bracing set ,x-arms,knee bracing set ,drilling of holes in x-bracing set,x-arms, fixing of barbed wire and erection of pole. , erection of stay set digging of pit,fixing of stay rod,filling of pit & nozzeling & tighting & filling of pit . , erection of earthing set ht digging of pit & filling of pit, fixing of stay rod