tender for addition/ alteration of house no. 238 (type v), sector 16,- 1 dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the engineer in charge. 2 providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. glazed vitrified tiles matt/antiskid finish of size size of tile 600 x 600 mm 3 providing and fixing ist quality glazed vitrified wall tiles of size 600x1200 mm conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with classic grey tile adhesive @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 600 x 1200 mm. 4 providing and fixing of kitchen cabinet below working shelves made out with 19mm thick commercial isi marked plyboard and front portion of the cabinet furnished with 1mm thick superior quality sun mica of outer side and 0.8mm thick sun mica inner side of the cabinet for fixing the kitchen accessories and jack at bottom synthetic enamel paint over remaining portion. it is also include the cost of sprit polishing on the edge of the lipping cost of stainless steel handle, adhesive, nail, screws etc. complete fixed in position to the entire satisfaction of engineer-in-charge. 5 providing and fixing 1.5mm thick polycarbonate sheet to be fixed on the existing ms frame with self drilling machine screws complete in all respect to the entire satisfaction of engineer-in-charge. 6 providing and fixing 6mm thick polycarbonate multi wall sheet to be fixed on existing m.s. frame with aluminum rivets complete in all respect to the entire satisfaction of engineer-in-charge. 7 providing and fixing 2-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . the rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of engineer-in-charge. 8 providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. the top of jaffery is to be covered with another strip of 2 x 1.3/8”. the complete panel is to fixed over existing wall and m.s. angle with iron nuts and bolts etc. the complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of engineer-in-charge.