tender for annual repair to rb type-7, sector-7 chandigarh. (new allotment)-- 1 wall painting with prernium acrylic emulsion paint of interior grade, having voc (volatile organic compound )content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.one coats 2 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work 3 finishing walls with acrylic smooth exterior paint of required shadeold work (one or more coat applied @ 0.90 ltr/10 sqm). 4 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 5 providing and applying cement based putty (birla, jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of engineer-in-charge. 6 french spirit polishing : one or more coats on old work 7 providing and laying vitrified tiles in floor indifferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the jointswith white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. double charge vitrified tile polished finish of size. size oftile 600 x 600 mm 8 providing and fixing 1st quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9 dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the engineer in charge. 10 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) 11 provdingand installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by the engineer in charge) 0.50mm +-5% total coated thickness tct) thick zinc coating 100gsm as per is 277 in 240mpa steel grade, 5-4 microns epopxy primer on both sides of the sheetand polyester top coat of 15-18 microns. sheet should have protective guard film of 25 micron minimum to avoid scratches while transportation and should be supplied in single length upto 12 metres or as desired by the engineer in charge. the sheet shall be fixed by using self drilling / self tapping screws of size (5.5x55mm) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpetwashers or with g.i. limpet washers filled with whitel ead complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete in all repsects and to the entire satisfaction of the engineer in charge. 12 providing and fixing 2-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . the rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of engineer-in-charge. 13 providing and fixing wooden cabinet of 13½” deep and 2’-0 height with open able shutter at wall above 4’-9 height consisting of 19mm thick with commercial board (isi marked) lipped with teak wood lipping of 19mm x 6mm on exposed edges include cost of nail, screws, auto hinges, synthetic adhesive etc. the front shutter and sides are to be furnished with 1mm thick isi marked superior quality mica of approved shade and inner side of the cabinet with 0.8mm thick mica of approved shade fixed in position with help of wooden gutties at wall complete in al respect to the entire satisfaction of engineer in charge. 14 providing and fixing of kitchen cabinet below working shelves made out with 19mm thick commercial isi marked plyboard and front portion of the cabinet furnished with 1mm thick superior quality sun mica of outer side and 0.8mm thick sun mica inner side of the cabinet for fixing the kitchen accessories and jack at bottom synthetic enamel paint over remaining portion. it is also include the cost of sprit polishing on the edge of the lipping cost of stainless steel handle, adhesive, nail, screws etc. complete fixed in position to the entire satisfaction of engineer-in-charge. 15 providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (granite). 16 providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. the top of jaffery is to be covered with another strip of 2 x 1.3/8”.the complete panel is to fixed over existing wall and m.s. angle with iron nuts and bolts etc.the complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of engineer-in-charge. 17 providing and fixing 35mm thick 2nd class teak wood (kiln seasoned) wire gauge door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail wire mesh 22 x 12 mm gauge fixed with 1/2” x 3/4” teak wood (kiln seasoned) beading, incluuding stainless steel fittings and french spirit polish, complete fixed in position and in all respect to the entire satisfaction of engineer-in-charge. 18 providing and fixing 2nd class teak wood(kiln seasoned) chowkhat 4 1/2 x 2 1/4including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and spirit polish of chowkhats. rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of two coats spirit polish complete in all respect and to the entire satisfaction of engineer-in-charge 19 providing and fixing 35mm thick 2nd class teak wood (kiln seasoned) panel door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail, teak wood (kiln seasoned) beading, with necessary 3 nos. of hinges, s.s. tower bolts,s.s. handles 5”, sliding boltand complete fixed in position including melamine polish complete in all respect to the entire satisfaction of engineer-in-charge 20 provding and laying water proofing coating having three coats of rain jackets @ 15 sqft/kg over a priming coat of water proofing paint @10sqft/kg including mesh of size 800 microns with total thickness of 900 to 1000 microns forming high elastic and resilient coating to uv raysand non toxic in nature with minimum life of 10 years complete in all respect as per directon and to the entire satisfaction of the engineer in charge. 21 providing and fixing 8mm thick wooden laminated floor class of use 31/23 having wear resistance level of ac-3 as per en-13329with a direct pressure laminate surface including profile, treated with aluminium side, flooring of approved colour and shade complete in all respects and to the entire satisfaction of the engineer in charge.