bids are invited for almirah large steel with shelves - almirah large steel with shelves.1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. almirah shall be finished with (shade of ta grey colour or as approved ge both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified/ shown in drawing and directed by enginer-in-charge.drg no fd-1031 , almirah small steel with shelves - almirah small steel with shelves.1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. almirah shall be finished with (shade of ta gray colour or as approved ge both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified/ shown in drawing and directed by enginer-in-charge. drg no fd-1032 , bed hard - bed hard. all steel member shall be 18 gauge mspipe. the frame of head board and foot board shall be of 38mm ms square pipe.18mm ms square pipe shall be provided in the inner of head/foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading sh