bids are invited for almirah small hh hs - almirah small hh hs.1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. almirah shall be finished with (shade of ta gray colour or as approved ge both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified/ shown in drawing and directed by enginer-in-charge.drg no fd-1034 , bin soil linen multipurpose - bin soil linen multipurpose.body of the bin soil linen multipurpose, shelves, drawers, shutters shall be made of 18mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. the surface of teak wood shall be french polished till obtaining glossy finish. rest all as specified/shown in drawing and directed by engineer-in-charge.drg no fd/e6/map/09 , board notice , chair writing. - chair writing.the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be