under the business plan in the work area of ​​electricity distribution division- deoband, the work of increasing the capacity of transformer from 100 to 250 kva at sampla road deoband.-2 safely carriage of 100 kv t / fesc sre to site of works through privet vehicle including loading and unloading at both ends. ( distance 0 to 40 k.m. ) 3 safety cartage of new 250 kva t / f from esc, sre, to the site of work at various sites including loading & unloading at both ends ( distance approx. 40 k.m. ) 4 constriction of plinth for installation of 250 kv t / f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick rcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall as per respo specificaiton & fencing work as per repo specification. 5 safely installation ofnew 250 kv t / f on the plinth with proper alignment and complete fitting including making connection and commissioning 6 earthing of 250 kva t / f ( 1 no body & 1 no. neutral earthing ) by boring of 60 ft deep & fixing of 60 ft. g.i pipe 11 / 2 dia ( jindal class b ) and connecting with g.i. strip of size 40x5 mm and g.i wire at bottom of g.i pipe to the t / f providing of required charcoal & salt in the pipe 7 safely carriage of line material esc sre to site of work including loading and both ends 8 laying, lifting, stringing, sagging jumpring & binding of acsr rabbit conductor for 11 kv line as per respo specification including complete.