tender for business plan work under edd i sre-2 opening of connection of 25 / 100 kva t / f properly. 3 removal of 25 / 100 kva t / f on the d / p from site of works to esc, sre including loading & unloading at both ends ( distance 0 to 35 k.m. ) 4 safely carriage of line material esc sre to site of works through privet vehicle including loading and unloading at both ends. ( distance 0 to 35 k.m. ) 5 safely carriage of 63 kv t / fesc sre to site of works through privet vehicle including loading and unloading at both ends. ( distance 0 to 35 k.m. ) 6 safely installation of 63 kva t / f on the d / p making connection properly 7 safety cartage of new 250 kva t / f from esc, sre, to the site of work at various sites including loading & unloading at both ends ( distance approx. 35 k.m. ) 8 constriction of plinth for installation of 250 kv t / f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick rcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall as per respo specificaiton & fencing work as per repo specification. 9 safely installation ofnew 250 kv t / f on the plinth with proper alignment and complete fitting including making connection and commissioning 10 chemical earthing of 250 kva t / f ( 1 no body & 1 no. neutral earthing ) by boring of 60 ft deep & fixing of 60 ft. g.i pipe 11 / 2 dia ( jindal class b ) and connecting with g.i. strip of size 40x5 mm and g.i wire at bottom of g.i pipe to the t / f providing of required charcoal & salt in the pipe 11 removal of old and used weasal conductor / gi wire ( 240 kg ) from site to esc saharanpur including loading and unloading both ends. 12 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductorfor11 kv & lt line including complete. 13 safely cartage of pcc pole 8.5 mtr long from esc, sre to the site of work including loading unloading at both ends. ( dist. up to 40 km. ) 14 erection of single support on pcc poles up to 8.5 mtrlong with complete fitting of all accessories oflt / ht line as per respo specification.