business plan work under edd deoband opening of connection of 63/250 kva t/f properly. 3 removal of 63 kva t/f on the d/p from site of works to esc, sre including loading & unloading at both ends (distance 0 to 40 k.m.) 4 removal of 250 kva t/f on the plinth from site of works to esc, sre including loading & unloading at both ends (distance 0 to 40 k.m.) 5 safely carriage of line material esc sre to site of works through privet vehicle including loading and unloading at both ends. (distance 0 to 40 k.m.) 6 safely carriage of 100 kv t/fesc sre to site of works through privet vehicle including loading and unloading at both ends.(distance 0 to 40 k.m.) 7 safely installation of 100 kva t/f on the d/p making connection properly 8 safety cartage of new 400 kva t/f from esc, sre, to the site of work at various sites including loading & unloading at both ends (distance approx. 40 k.m.) 9 safely installation ofnew 400 kv t/f on the plinth with proper alignment and complete fitting including making connection and commissioning 10 chemical earthing of 400 kva t/f (1 no body & 1 no. neutral earthing) by boring of 60 ft deep & fixing of 60 ft. g.i pipe 11/2 dia (jindal class b) and connecting with g.i. strip of size 40x5 mm and g.i wire at bottom of g.i pipe to the t/f providing of required charcoal & salt in the pipe 11 laying, lifting, stringing, sagging jumpring & binding of acsr rebbit conductorfor11 kv & lt line including complete. 12 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductorfor11 kv & lt line including complete. 13 safely cartage of pcc poles from esc, sre to the j.e./ contractor store & then to the site ofwork at various sites including loading & unloading at both ends. (dist. 0 to 40 km.) 14 erection of single support on pcc poles with complete fitting of all accessories oflt & ht line. 15 providingand fixing of clamp with nuts bolts made of new ms flat iron 50x6 mm on pcc poles. 16 fixingof stay rods by digging of pits in block of 600x600x300mm. with 1st class brick andnozzling of stay wire 7/10 swg and fitting the same on the pole including fixing of stay insulator in stay wire. 17 providing& fixing of brass lugs properly as per respo specification. 18 providing& fixing of aluminum lugs properly as per respo specification. 19 lead for 400 kva t/f. 20 lead for 100 kva t/f.