supply of wooden benches to zilla parishad schools ( standard i to iv) , school bench for 1st to 4th section a — pine wood components (1 thick, natural oil finish) writing top — pine wood (1 thick)l36×w12×t1 | 915×305×25 mm, seat board — pine wood (1 thick) l36×w10×t1 | 915×254×25 mm , backrest board — pine wood (1 thick) l36×w6×t1 | 915×152×25 mm, bookshelf board — pine wood (1 thick) l36×w10×t1 | 915×254×25 mm, natural oil finish (linseed/tung oil) applied on all wood surfaces, 2 coats, sandpaper & surface prep materials 80/120/180 grit, all wood panels, section b — m.s. steel frame components m.s. square hollow section pipe 18g -1×1 (25×25mm), 18g — legs, desk frame, back uprights, m.s. l-angle 18 gauge - 1×1 (25×25mm), 18g — shelf support, cross bracing, welding charges (mig/arc) - full frame fabrication, all joints, grinding, anti-rust primer (red oxide) - on all m.s. surfaces before oil paint, 1 coat oil paint — enamel / synthetic - on all m.s. frame, 2 finish coats, approved colour, electrodes / welding consumables- as required for complete welding section c — hardware, fittings & accessories m.s. bolts, nuts & washers - m8×50mm zp — for fixing wood to frame, rubber floor caps / foot pads- on all 4 legs, anti-scratch, 1 sq. wood screws (ss / zp) - for fixing wood panels to frame, 2 & 3 section d — transportation transportation & delivery - to project site, packing and unloading included