tender for repair replacement of misc furniture for offers md accommodation and temp accn at rms; 1 sofa set five and four seater (qty 25 & 06 set)taking out old unserviceable components of sofa set five & four seater and s& f new components as per shape and size as per existing one made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 2 seat rails right and left of sofa set (single seater) 3 seat rails front and back of sofa set (single seater) 4 rails of back frame top and bottom of sofa set (single seater) 5 back and bottom support of sofa set (single seater) 6 long rails of seat front and back of sofa set (three seater) 7 long rails of back frame top and bottom of sofa set (three seater) 8 long back and bottom support of sofa set (three seater) 9 arms of sofa set. 10 bearers of seat and back rest of sofa set. 11 taking out old unserviceable foam cushion and s & f new cool foam cushion 32 kg/cum density of make sleepwell/kurlon of size 580x560x100mmwith and including superior quality tapestry cloth cover duly stitched at one end with openable zip and other making good shape (tapestry cloth not less than rs.295/- per mtr) colour & pattern as approved. 12 m & l for two coats of best quality polish for internal and external surfaces to the sofa set 5 seater including cleaning and preparing the old surfaces. 13 m & l for two coats of best quality polish for internal and external surfaces to the sofa set 4 seater including cleaning and preparing the old surfaces. 14 supply only new tapestry cloth cover duly stitched at one end and at other end with openable zip and to fit for sofa cushion 580x560x100mm (tapestry cloth not less than rs. 295/- per mtr) colour and pattern as approved. 15 table writing (qty 40 nos)taking out old unserviceable components of table writing and s & f new components as per shape and size as per existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 16 top made out of 18mm thickpre-laminated mdf board teak faced of make as approved & providing teakwood beading 4 mm thick all around the top with and including polishing all as specified and directed. 17 legs 18 top rails 19 stiffeners 20 drawers and providing cp knob 40mm 21 shutter of cupboard made out of 18mm thick pre-laminated mdf board teak faced and providing cp knobs and piano hinges for hanging with the table 22 plywood 6 mm thick commercial on back of cupboards 23 m & l for two coats of best quality polish to the table after preparation of old surfaces. 24 table 900 mm x 600 mm with drawers (qty 15 nos)taking out old unserviceable components of table with drawers of size 900 x 600 mm and s& f new components as per shape and size as per existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 25 top made out of 18mm thick pre-laminated mdf board teak facedand providing teakwood beading duly polished of 4 mm thick all around the top. 26 legs 27 short rail 28 long rails 29 short stiffeners 30 long stiffeners 31 drawers 32 m & l for two coats of best quality polish to the table after preparation of old surfaces. 33 table dining 6 pers (qty 50 nos)taking out old unserviceable components of table dinning 6 pers and s& f new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 34 top made out of 18mm thick pre-laminated mdf board teak faced and providing teak wood beading 4mm thickduly polished all around the top includig fixing of 8 nos wooden corners to joning corner of rails and legs for each table. 35 legs 36 long rails 37 short rails 38 m & l for two coats of best quality polish to the table after preparation of old surfaces. 39 table dressing ladies (qty 25 nos)taking out old unserviceable components of table dressing ladies and s& f new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 40 looking mirror of size 1220 x 365 mm & 5mm thick. 41 frame and back member of the mirror including back side 6mm thick commercial plywood 42 legs 43 top made of 18mm thick pre-laminated mdf board teak faced and providing 4mm thick teakwood beading duly polished on front. 44 drawers including cp knob 40mm. 45 glass panes shutters 5 mm thick alongwith aluminium channel and glass runners. 46 m & l for two coats of best quality polish to the table after preparation of old surfaces. 47 table dressing gents (qty 08 nos)taking out old unserviceable components of table dressing gents and s& f new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 48 looking mirror of size 760 x 380mm & 5mm thick 49 frame & back member of the mirror including back side 6 mm thick commercial plywood 50 drawers including cp knob 40mm. 51 top made out of 12 mm thick pre-laminated mdf board teak faced and providing 4 mm thick teakwood beading on front side. 52 m & l for two coats of best quality polish to the table after preparation of old surfaces. 53 hat stand with mirror (qty 20 nos)taking out old unserviceable components of hat stand and s& f new components as per shape and size as existing all as specified and shown on drawing and as directed by engr-in-charge :- 54 looking mirror of size 300 x 440mm & 5mm thick 55 plywood 4mm thick one side teak face on front of size 1000 x 710 mm& new teak wood edging duly polished of size 6 x 35 mm all around the hat stand 56 aluminium pegs 100 mm long 57 m & l for two coats of best quality polish to the hat stand after preparation of old surfaces. 58 side board (qty 20 nos)taking out old unserviceable components of side board and s& f new components as per shape and size as existing made out of pre-laminated mdf board of make-green/century/archid all as specified and shown on drawing and as directed by engr-in-charge :- 59 top. 60 sides left and right. 61 shutters and providing cp knobs 40mm and drawer lock 4 lever to the shutter. 62 drawers including cp knob 40mm. 63 back of 6mm thick commercial plywood of make-globe/green/archid 64 legs made offirst class teak wood seasoned. 65 m & l for two coats of best quality polish to the side board after preparation of old surfaces. 66 chair dining (qty 180 nos)taking out old unserviceable components of chair dining and s & f new components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by engr-in-charge :- 67 front legs 68 rear legs 69 front rails 70 side rails 71 back rails 72 back rest 73 stiffeners 74 m & l for two coats of best quality polish to the chair after preparation of old surfaces. 75 chair easy (qty 80 nos)taking out old unserviceable components of chair easy and s & f new components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by engr-in-charge :- 76 front legs 77 rear legs 78 side rails 79 front rails 80 back rest 81 arms 82 m & l for two coats of best quality polish to the chair after preparation of old surfaces. 83 chair writing (qty 50 nos)taking out old unserviceable components of chair writing and s & f new components as per shape and size as per existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by engr-in-charge :- 84 front legs 85 rear legs 86 front rails 87 side rails 88 back rails 89 back rest 90 arms 91 stiffeners 92 m & l for two coats of best quality polish to the chair after preparation of old surfaces. 93 chair easy, dining, writing and stool dressing 94 removing of old unserviceable plastic cane and m & l for re-canning of various types chairs and stool dressing etc,with half round plastic cane 2mm wide 0.4mm thick for seat and back, border with 4mm wide 0.5mm thick, finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing and as directed by engr-in-charge 95 chair dining offrs (qty 150 nos)taking out old unserviceable components of chair dining offrs and s & f new components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by engr-in-charge :- 96 front legs 97 rear legs 98 front rails 99 side rails 100 back rails 101 back rest 102 cushion seat alongwith approved coloured fabric 103 supply and fixing new tapestry cloth cover with seat duly stitched (tapestry cloth not less than rs.290/- per mtr) colour and pattern 104 stiffeners 105 m & l for two coats of best quality polish to the chair after preparation of old surfaces. 106 chair dining jcos/ors (qty 140 nos)taking out old unserviceable components of chair dining jcos/ors and s & f new components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by engr-in-charge :- 107 front legs 108 rear legs 109 front rails 110 side rails 111 back rails 112 back rest 113 stiffeners 114 new pvc seat 115 m & l for two coats of best quality polish to the chair after preparation of old surfaces. 116 dressing table ladies incl stool (qty 15 nos)taking out old unserviceable components of dressing table ladies incl stool and s & f new components as per shape and size as existing made out of well seasoned 1st class teak wood & pre-laminated mdf board all as specified and shown on drawing and as directed by engr-in-charge :- 117 looking mirror 5mm thick 118 frame and back member of the mirror including back side 6 mm thick commercial plywood 119 legs 120 top 121 drawers made out of 18mm thick pre-laminated mdf board on fron side and plywood sides and bottom including telescopic channels & cp handle 100mm. 122 shutters with and including cp handle 100mm and magnetic catcher. 123 sides. 124 twin wheel castors 125 cushion 32 density with covered on tapestry cloth for stool dressing 126 m & l for two coats of best quality polish to the table after preparation of old surfaces. 127 table dining 120x90cm (qty 15 nos)taking out old unserviceable components of table dinning 120x90cm and s& f new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by engr-in-charge :- 128 top made out of 18mm thick pre-laminated mdf board teak faced of make-green/century/archid and providing teak wood beading 4mm thick all around the topincludig fixing of 8 nos fi bracket 25x3mm to joning corner of rails and legs for each table 129 legs 130 long rails 131 short rails 132 m & l for two coats of best quality polish to the table after preparation of old surfaces. 133 locker steel (qty 500 nos)taking out old unserviceable components of locker steel and s & f new components as per shape and size as existing all as specified and shown on drawing and as directed by engr-in-charge :- 134 bow handle chromium plated heavy duty. 135 hanging rod 20mm dia cp 136 sockets 25mm dia chromium plated with fixing steel screw. 137 repair of loose doors by replacing unsv existing hinges, fittings and adjustment for smooth functioning as specified. 138 hasp and staple 75mm cp fixed with revits to the shutters. 139 tower bolt 75mm welded to the shutter. 140 legs made out of 1mm thick ms sheet. 141 m & l for de-rusting, denting scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint satin finish(locker shall be painted in dual colour. body shall be painted in ivory/off white & door shall be painted in sky blue/light blue colour) internally and externally with spray gun complete all as specified and as directed by ge/engr-in-charge. 142 rack six tiers steel 915x610x1905mm (qty 18 nos)taking out old unserviceable components of rack steel and s & f new components as per shape and size as existing all as specified and shown on drawing and as directed by engr-in-charge :- 143 shelves made out of 1mm thick ms sheet.. 144 m & l for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint og internally and externally with spray gun complete all as specified. 145 table dining ors (qty 30 nos)taking out old unserviceable components of table dining ors and s & f new components in replacement as per shape and size as exiisting all as specified and shown on drawing and as directed by engr-in-charge :- 146 legs made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame. 147 long stiffener made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame. 148 short stiffener made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame. 149 hard rubber shoes with inside steel washers for legs. 150 top made out of 18mm thick mdf board covered on top with 22 guage aluminium sheet, and fixed to frame with 40 mm steel screw. 151 m & l for welding to the entire frame and painting to the frame with one coat of synthetic enamel black paint after preparation of steel surface. 152 charpoy gi pipe with plywood top (qty 165 nos)taking out old unserviceable components from charpoy gi pipe and s & f new components as per existing shape & size complete all as specified and shown on drawing and as directed by engr-in-charge. 153 top of 12 mm thick ply wood commercial of make-globe/green/archid 154 ms plate 50x5mm thick and 900mm long painted with two coats of black paint over a coat ofred oxide. 155 long rails made out of gi pipe 32 mm dia, medium grade, as per existing shape and size and making necessary threads on both ends complete all as specified and shown on drawing and as directed. 156 fixing only short rails (converted from retrieved long rails) of charpoy gi pipe including necessary cutting, threading, complete all as specified and as directed.(note : gi pipe retrieved from item no 30(c) above shall be re-used under this item) 157 fixing only legs (converted from retrieved short rails) of charpoy gi pipe made out of 32mm dia gi pipe with necessary cutting, threading and welding fi clamp two nosetc. complete all as specified and as directed. (note : gi pipe retrieved from item no 30(d) above shall be re-used under this item) 158 3 way gi elbow (isi marked) suitable for 32mm bore gi pipe. 159 check nut 6mm thick suitable for 32mm bore gi pipe. 160 hard rubber shoes with inside steel washers for legs. 161 m & l for applying one coat of synthetic enamel paint aluminium gi pipe & black paint of ftat iron after preparation of surfaces. 162 chair varandah with nylon newar (qty 250 nos) 163 s & f new pieces of conduit pipe 20mm dia of 75 mm long and 1.6mm thick and welded to the worn out piece of legs the chair verandah and also spot welding of cracks and joints as specified and shown in drawing and as directed by engr-in-charge. 164 removing old unserviceable tape newar from chair varandah and m & l for applying one coat of synthetic enamel paint white to the frame of the chair after preparation of surfaces as directed by engr-in-charge. 165 m & l for weavingwith 50-55mm wide tape nylon newar best quality light coloured as specified and shown in drawing and as directed by engr-in-charge. 166 new hard rubber shoes with inside steel washers for legs. 167 chair varandah (qty 200 nos)removing old unserviceable pvc seat from chair varandah and s & f new components as per shape and size as existing all as specified and shown in drawing and as directed by engr-in-charge. 168 m & l for applying one coat of synthetic enamel paint white to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed. 169 pvc seat 170 pvc back 171 hard rubber shoes with inside steel washers for legs. 172 chair school with hand board (qty 75 nos)taking out old unserviceable components of chair school and s& f new componentsin replacement as per shape and size as existing all as specified and shown on drawing and as directed by engr-in-charge :- 173 hand board made of 18 mm thick pre-laminated mdf board teak face make : green/centure/ archidduly provided pvc beading balck all round the top & screwed to 25mm dia steel pipe inserted in 20mm dia ms rod welded to frame. 174 leg made out of 25mm dia ms pipe. 175 pvc one piece of seat and back 176 hard rubber shoes with inside steel washers for legs. 177 m & l for applying one coat of synthetic enamel paint brown to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed. 178 rack shoe steel (qty 50 nos)taking out old unserviceable components of rack shoe and s& f new componentsin replacement as per shape and size as existing all as specified and shown on drawing and as directed by engr-in-charge :- 179 leg made out of 25mm thick. 180 shelves made out of 20mm dia frame & 3mm dia ms rod. 181 m & l for applying one coat of synthetic enamel paint black to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed. 182 cushion push back type multiplex chair (25 nos) 183 supply and fixing of newpvc (pu) handle of size 49cm length, 7cm wide and 5mm thick with bowl as existing fixed with appropriate size steel screws including taking out of old unsv pvc (pu) handle and deposit to bso store yard complele all as specified and as directed. 184 repair to automatic push back system of chairs by opening the existing system and replacing the unserviceable accessories like spring, nut bolts, ms plates etc. of existing size, greasing complete all as specified and as directed. 185 supply & fixing of synthetic foam cushion 100mm thick foam of 40 density of approved quality fixed on 12mm thick commercial plywood bwr grade at bottom of cushion and seat of chair including removing the existing unserviceable cushions and deposit to bso store yard complete all as specified and as directed. 186 supply and fixing of good quality tapestry cloth valvet type of cost not less than rs 440/- per mtr of approved shape and texture with proper stiching including removing of existing unserviceable tapestry cloth from seat and deposit to bso store yard complete all as specified and as directed.