supply of civiltestinglaboratory , civil testing laboratory (noc) items , pycnometer conforms to is:2386 (part 3) glass jar complete with brass cone and a rubber seal. capacity:1 kg , liquid limit device with all accessories conforms to is: 2720 (part 5) complete with a revolution counter and supplied with one astm grooving tool, one casagrande tool and a standard gauge block. , field density of soil apparatus ( sand pouring cylinder ) with complete set conforms to is: 2720 (part 28). this comprises of sand pouring cylinder with a conical funnel and shutter. calibration container 100mm inner diameter x 150 mm high with 200mm diameter rim. metal tray 300mm square x 40mm deep with a 100mm diameter hole in the centre. , proctor compaction apparatus with all accessories conforms to is: 10074 it comprises of proctor type compaction mould of 100mm diameter x 127.3mm high with a 1000cm3 capacity, made of gun metal, consisting of mould body, base plate and collar, compaction rammer made from corrosion protected steel is of 2.6kg weight, 50mm diameter with a 310mm controlled drop. , direct shear machine with complete accessories as per is 2720 (part xiii). motorized to give the single rates of strain: 1.25 mm/min. suitable for operation on 220 volts, 50hz, single phase ac supply. complete unit with all accessories the apparatus comprises of the following:- loading unit: vertical load, capacity 8 kg/sq. cm. load is applied either directly or through a counter balanced detachable lever. provision is made for the load to be applied either through a steel ball recessed in the loading pad or directly through a boss on the loading yoke. shear load capacity 400 kg. direct shear box for square specimen size 60x60x25 mm complete with one base plate, two plain gripper plates, two perforated gripper plates, porous stones and one loading pad. shear box housing, complete with two ball roller strips. specimen cutter for 60x60x25 mm specimen. set of weights: to give kg/cm2 - 0.05/kg cm2 -