supply of material testing lab ii--1 2 pycnometer: nconforms to is: 2386 ( part 3 ) nglass jar complete with brass cone and a rubber seal. ncapacity : 1 kg n 3 liquid limit device with drop counter – hand operated: nconforming to is: 2720 ( part 5 ) ncomplete with a revolution counter and supplied with one astm grooving tool, one casagrande tool and a standard gauge block. n 4 sand pouring cyclinder ( small ) : nconforming to is: 2720 ( part 28 ) this comprises of : sand pouring cyclinder with a conical funnel and shutter. calibration container 100mm. inner diameter x 150mm high with 200mm. diameter rim. metal tray 300mm. square x 40mm deep with a 100mm. diameter hole in the centre n 5 proctor compaction apparatus light nconforms to is : 10074 nit comprises of proctor type compaction mould of 100mm diameter x 127.3mm high with a 1000 cm3 capacity, made of gun metal, consisting of mould body, base plate and collar, compation rammer made from corrosion protected steel is of 2.6kg. weight, 50mm. diameter with a 310mm controlled drop. n 6 direct shear apparatus hand operated: nconforms to is:2720 ( part 13 ) nthis comprises of a shear box assembly 60mm. square, supplied with two porous plates, two solid grid plates, one retaining plate and one loading pad, complete with a shear box housing and ball roler strips. loading unit normal stress capacity is 3 kg. / cm? 2 ( on a 60mm. square specimen ) complete with lever loading fixture. specimen cutter for a specimen size 60mm x 60mm x25mm high. set of weights as follows, to give a normal stress of 3 kg. / cm? 2 through lever arrangements; 4 x 0.05, kg. / cm? 2, 1 x 0.1kg. / cm? n 2, 1 x 0.2 kg. / cm ?2, 3 x 0.5kg. / cm? 2, 1 x 1.0kg. / cm ?2. nessential for the above nproving ring 2kn capacity ndial gauge 0.01mm x 25mm travel. n 7 deval attrition testing machine: nconforming to i.s.2386 ( part 4 ) nthis machine comprises of two hollow cyclinders with one end closed and the other having tight fitting covers. the cylinders are mounted on a shaft making an angle of 300 with its axis of rotation. the shaft rotates at 30 to 33 rpm through a reduction gear. an automatic revolution counter is also provided to count the total number of revolutions. supplied with 12 hardened steel balls of 48mm. diameter. wired for 440v. 3ph. 50hz. n