running tender about business plan electric works under edd deoband-2 safety cartage of pcc poles from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 3 safety cartage of other lines material ( except pcc poles ) from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 4 erection of single support on pcc poles with complete fitting of all accessories of lt & ht line. 5 safety cartage of 63 / 100kva t / f from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 6 fabrication and erection of d / p on pcc poles 8.5 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 7 safely installation of 63 / 100 kv t / f on the double with proper alignment and complete fitting including making connection and commissioning. 8 laying, lifting, and stringing proper sagging abc cable of site 3x50 + 1x70 + 1x16 sq.mm, 3x50 sq.mm including fixing of all type clamp and connector providing all accessories 9 removal of old & damaged acsr conductor from the existing poles with making bundle & shifting the same from site to je store / esc, sre including loading & unloading at both ends. 10 earthing of pole by earthing rod. 11 tighting of loose stay including opening, binding &noseling of stay wire. 12 laying, lifting, stringing, sagging jumpring & binding of acsr rebit conductor 13 laying, lifting, stringing, sagging jumpring & binding of acsr weasal conductor 14 providing of ltshakle insulator. 15 grouting of poles 16 laying of lt pvc cable 3.5x150 sq. mm. from t / f to d / p with complete fitting as per respo specification. 17 grouting of stay rod after digging of pits in block 600x600x 300 mm in concreting ratio 1:4:8 with istclass brick ballast as per resspo specification. 18 providing and fixing of all type clamps with nuts bolts made of new ms flat iron 50x8 mm. as per respo specification. 19 off shooting of tree branches touching the above 11 kv line. ( no of tree branches 400 no )