supply of l.t bushing rod made of aluminium with l.t connector suitable for 10 kva to 63 kva t / f and as per specifications as gtp ( ii ) supply of l.t bushing rod made of brass suitable for 100 kva tf and as per specification and , l.t. bushing rod for 10–63 kva t / f : thickness 11.8mm and total length 155mm ofaluminium metal. raw material: made for ec grade rod as per hindalco, balco, nalco, thread one side 55mm and other side 25mm with 2 no. hex nut size19×10mm and 1no. alu. collar nut size 45mm dia and thickness 15mm, 1no. alu. washer dia m-32 and thickness 4mm, 1no. sealing washer for stem nitrile rubber, hardness 65 to 70 irho. weight 90 gm. lt connector suitable for lt bushing rod total length 90mm, cap dia 40mm, inner dia 36mm. raw material: alu. alloy lm-6 for pressure dia casting with manufacture monogram. 1no. brass bush length 25mm, threading m-12. alu. flat parts size 50×50×10mm with 2no clamps, alu. piece 40×16mm and 2no m.s. u bolt m-8, 4no m.s. nut m-8, 4no m.s. washer m-8, 4no. spring washers m-8. aluminium + brass weight 150 gms., m.s. weight 90 gms. total weight 240 gms. ( tolerance + 1.5% ) complete set.as per relevant iss with latest amendment and as per approved gtp, drg. & sample. , supply of l.t bushing rod made of brass suitable for 100 kva t / f, size 11.8 mm dia, length 205 mm both end threaded ( one side 45 mm threaded, other side 70mm threaded ) with 02 no. hex nut, 03 no. chuck nut, 01 no. collar, 01 no. oil seal washer & 01 no. oil seal holder ( suitable for oil seal 12 mm ) & 01 no. 12 mm neoprene oil seal. complete in all respect. ( minimum weight of brass metal-425 gm ) ( tolrance ±1.5%, no negative tolrance allowed in weight ) and as per approved gtp and sample.