supply of distribution transformer m-12 h.t. bushing rod for 10 100 kva made of aluminium supply of ht bushing rod, made of brass, suitable for 250/400/630 kva as per reverent is 3347(part-iii/sec 2) 1982 with latest amendment , distribution transformer m-12h.t. bushing rod for 10–100 kva : (part a) thickness 11.8mm, total length 85mm, aluminium metal. raw material: made for ec grade aluminium as per hindalco, balco and nalco threading both side in length of 25mm, 2 no. hex nut 19×10mm, 1no. sealing washer for stem (nitrile rubber, hardness 65 to 70 irho) 1no. m.s. pin 4×22mm. h.t. connector suitable for m-12 ht bushing rod for 10–100 kva: (part b) total length 80mm, diameter of cap 50mm, inner size 46mm, aluminium alloy lm-6 with pressure diameter casting body with manufacture monogram, 1no brass bush length 25mm with m-12 threading, 1no aluminium. t with m-10 threading, 1 no. m-10 m.s. nut, 1no. plain washer, 1 no. spring washer. total aluminium + brass weight 132 gm. total m.s. weight 13gm. total weight 145gm. (tolerance ±1.5%) no. negative tolerance in weight. note: part a & part b of this item makes a complete set and supplier has supplying this item as per above specification as a complete set. as per relevant iss with latest amendment and as per approved gtp, drg. & sample. , ht bushing rod, made of brass, suitable for 250/400/630 kva transformers size – 11.8 mm dia, length 134 mm with suitable brass nuts, brass cap with one nitrile rubber oil seal and as per reverent is 3347(part-iii/sec 2) 1982 with latest amendment & as per enclosed g.t.p drg and sample. (minimum weight of brass 260 gm.( tolrance in size +/- 1.5%, no negative tolrance allowed in weight. , total length 80mm, diameter of cap 50mm, inner size 46mm, aluminium alloy lm-6 with pressure diameter casting body with manufacture monogram, 1no brass bush length 25mm with m-12 threading, 1no aluminium. t with m-10 threading, 1 no. m-10 m.s. nut, 1no. plain washer, 1 no. spring washer. total aluminium + brass weight 132 gm. total m.s. weight 13gm. total weight 145gm. (tolerance ±1.5%) no. negative tolerance in weight. note: part a & part b of this item makes a complete set and supplier has supplying this item as per above specification as a complete set. as per relevant iss with latest amendment and as per approved gtp, drg. & sample.