work through running contract under full deposit scheme in the work area of ​​power distribution division - deoband.-2 safety cartage of pcc / sp55 poles from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 3 safety cartage of other lines material ( except pcc poles ) from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 4 safety cartage of 63 / 25 kva t / f from esc, sre, to the site of work at various sites including loading & unloading at both ends ( distance approx. 50 k.m. ) 5 fabrication and erection of d / p on pcc poles / sp55 8.5 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 6 erection of single support on pcc poles with complete fitting of all accessories of lt & ht line. 7 laying, lifting, stringing, sagging jump ring & binding of acsr weasal conductor for ht line. 8 grouting of stay rods by digging of pits in block 600x600x300 mm & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7 / 10 swg and fitting the same on the pole including fixing of stay insulator in stay wire. 9 safely installation of 63 / 25 kv t / f on the d / p with proper alignment and complete fitting including making connection and commissioning. 10 providing and fixing of all type clamps made of new ms flat iron 50x6 mm on pcc / st poles. 11 off shooting of tree branches touching the above line 12 safely installation of distribution box on the pole. 13 providing of prc connector 14 laying, lifting, and stringing proper sagging ab cable of site 3x50 + 1x35 + 1x16 sq.mm, 3x50 sq.mm including fixing of all type clamp and connector providing all accessories 15 pole of earthing by earthing rode