construction of various lines under edd deoband-2 safety cartage of pcc poles 8.5 mtr long and sp-55 11 mtr long from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 3 safety cartage of other lines material ( except pcc / st poles ) from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 4 safety cartage of 63 / 25 kva t / f from esc, sre, to the site of work at various sites including loading & unloading at both ends ( distance approx. 50 k.m. ) 5 providing of holding clamp / with nuts bolts made of new ms flat iron 50x6 mm on pcc poles. 6 erection of single support on pcc poles with complete fitting of all accessories of lt & ht line. 7 laying, lifting, stringing, sagging jump ring & binding of acsr doc conductor for ht line. 8 laying, lifting, stringing, sagging jump ring & binding of acsr weasal conductor for ht line. 9 pole earthing by earthing rod 10 laying of lt pvc cable 3.5x150 sq. mm. from t / f to d / p with complete fitting as per respo specification. 11 fabrication and erection of d / p on pcc poles / sp55 8.5 / 11 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 12 laying and dressing of 33kv / 11kv xlpe cable 3x300 / 3x70sq.mm2power cable in air / trench. 13 making of 33kv / 11kv xlpe heat shrinkable od / indoorjointing kits. 14 grouting of stay rods by digging of pits in block 600x600x300 mm & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7 / 10 swg and fitting the same on the pole including fixing of stay insulator in stay wire. 15 safely installation of 63 / 25 kv t / f on the d / p with proper alignment and complete fitting including making connection and commissioning. 16 safely cartage of ct / pt unit from esc store to site of workincluding loading & unloading at both ends 17 safe installation of ct / pt unit on the double pole with complete fittings including making connections and commissioning 18 carriage of 11 kv 11 kv philphar proof metering cubicle esc saharanpur to site of work including loading and unloadign at both ends 19 fixing of 11 kv philphar proof metering cubicle and makingthe frame of m.s channal 100x100x6 mm and fitting the same.