tender for misc civil work to prevent water logging at vaja ka kheda, udaipur - 1 building items (part a) 2 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 3 renewing glass panes, with putty and nails wherevernecessary :float glass panes of thickness 4 mm 4 supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. 5 painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : one or more coats on old work. 6 distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding: old work (one or more coats) including scrappingsurface and necessary repairs. colour change 7 painting exterior surface of wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision. (a) old work 8 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. 9 providing and fixing m.s. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint 10 supplying and fixing in walls machine cut and polished stoneshelves, tands and in cm 1:3 with machine cut edges : sand or other approved stone 50mm thick. 11 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10mm and down gauge)including finishing with cement mortar 1:3 (1 cement : 3 finesand) as per standard design : 12 labour charges for repair to door / window without using anymaterial such as applying randha (finishing) tightening of bolts& screw etc. 13 repair of existing steel glazed doors, windows and ventilator,ms sheet door,garage doors,compound wall gates etc by welding drilling complete include cost of welding rods and hire charge of welding machine & tp etc complete. 14 providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to is : 13753 & is :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar). 15 providing and fixing 1st quality mat finished ceremic tilesize 300x300mm confirming to is : 13755 and is : 15622colour such as white, grey, ivory, fume red brown, light green,light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointingin the white cement mixed with pigment to match the shade ofthe tile complete (including the cost of cement mortar bed 16 random rubble stone masonry for with hard stone infoundation and plinth in cement sand mortar above 30 cmthick wall in: cement mortar 1:6 ( 1-cement : 6-sand). 17 random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : cement mortar 1:6 ( 1-cement : 6-sand). 18 surface dressing of the ground including removing vegetationand inequalities not exceeding 15cm deep and disposal ofrubbish lead up to 50 mtr. and lift up to 1.5 mtr. : all kinds ofsoil 19 providing and fixing steel glazed doors windows andventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm.long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size) or with wooden plugs and screws or rawlplugs and screws with fixing clips or with bolts and nuts asrequired including providing and fixing of plain glass panes4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screwscomplete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. asrequired : windows side hung /ventilators top or centre hung (openable)deduct for pin headed 4mm thick glass panels is used instead of 4mm thick plain glass 20 providing and fixingsquare bars or other flat welded to window, ventilators etc 21 earth work in excavation by mechanical means (hydraulicexcavator )/ manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including taking out the excavated soil and depositing andrefilling of jhiri with watering & ramming and disposal ofsurplus excavated soil as directed with in a lead of 50 meter.all kinds of soils 22 providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - all work up to plinthlevel. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 23 providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - all work up to plinthlevel. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 24 providing & laying broken glazed titles on roof ( brokenglazed tiles not less than 9 kg/sqm) on top of hot bitumen @1.7 kg/sqm. (1.40 kg of vg-40 (30/40 )grade and 0.30kg/sqm. of vg-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with waterproofing compund all complete as per direction of engineerin-charge. 25 structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting(height upto 10 m) , fixing in position and applying a primingcoat of approved steel primer all complete: 26 earth work in excavation by mechanical means (hydraulicexcavator )/ manual means over areas (exceeding 30cm indepth. 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed : all kindsof soil add extra for lead upto 3 km 27 kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm