tender for construction of pucca wall 04 feet 96rmt at nayi chouki beat rampur1 - clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m aboveground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 2 earth work in excavation by mechanical means ( hydraulic excavator)/ exceeding 30 cmin depth 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: all kinds of soil. 3 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size.) 4 random rubble: stone masonry for with hard stone in foundation and pllinth in cement 5 and mortar above 30 cm thick wll in: cement mortar 1:6 ( 1 cement: 6 sand 5 random rubble: stone masonry with hard stone in superstructure above pllinth level and upto five level above 30 cm thick walls in: cement mortar 1:6 ( 1 cement: 6 sand), add extra for random rubble stone masonry with hard stone in square or rectangular pillars,( rates- 3479+173-3652 6 random rubble: stone masonry with hard stone in superstructure above pllinth level and upto five level above 30 cm thick walls in: cement mortar 1:6 ( 1 cement: 6 sand) 7 plaster on new surface on wlls in cement sand mortar 1:6 including racking of joint etc. complete fine finish: 25 mm thick 8 pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand ) flush /ruled/ struck or weathered pointing 9 providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification: 10 providing and fixing weided mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. welded mesh 25mmx25mmx2.1mm 11 steel work in built up tubular trusses including cutting hoisting (height upto 10 m. ) fixing in position and applying a priming coat of approved steel primer velded and bolted including special shaped washers etc. complete . hot finished welded type tubes. 12 iron gate