carrying out the different works in system improvement scheme and business plan under the jurisdiction of edd-i moradabad. ( refer tender documents ) .-1 carriage of the following material from store centre, majhola/je’s store to site of work with loading & unloading at both ends (distance about 50 km.) 2 (a) 8.5 mtr. long pcc poles. 3 (b) 63 kva transformers. 4 (c) 100 kva transformers. 5 (d) acsr weasel conductor 6 (e) acsr rabbit conductor 7 (f) other line material (such as cross arms, insulators, t-off channel, guarding channel etc.) 8 erection of 8.5 mtrs. long pcc pole, fixing of all accessories by providing stone pad 300x300x75 mm., m.s. clamps, nuts & bolts, including concreting of poles in 11 kv line as per respo norms. 9 erection of 8.5 mtrs. long pcc double pole, fixing of all accessories by providing and fitting of m.s. clamps, nuts & bolts, including concreting of poles as per respo norms. 10 grouting of pcc poles with cement, sand and brick ballast in ratio of 1:4:8 including making plinth all around the pole as per respo norms. 11 fixing and grouting of stay rods including its binding and nozzeling at both ends by providing and fixing of m.s. clamps, nuts & bolts as per respo norms. 12 grouting of earth rods for making earthing of poles and transformers as per respo norms. 13 laying, stringing and sagging of acsr weasel conductor in 11 kv line including making jumpers and binding on insulators of all three phases/l.t. line as per respo norms. 14 laying, stringing and sagging of acsr rabbit conductor in 11 kv line including making jumpers and binding on insulators of all three phases/l.t. line as per respo norms. 15 providing and fixing of danger plate with m.s. clamps, nut & bolts as per respo norms. 16 uprooting of 25 kva transformers on double pole with opening h.t. & l.t. connections as per respo norms. 17 mounting of transformers of following capacity on double pole including its safe placement and making connections as per respo norms :-. 18 (a) 63 kva transformers. 19 (b) 100 kva transformers. 20 lowering and dismantling of old, rusted, damaged conductor from existing line, making bundles of wire and stacking the same at a safe place. 21 fixing and fitting of tpmo fuse set and fuse set on double pole by providing m.s. clamps, nuts & bolts as per respo norms. 22 back safe carriage of the following material from work site to store centre, majhola including its loading and unloading :- 23 (a) 25 kva transformers. 24 (b) scrap material (weasel conductor / iron etc.)