2 running contract work for full deposit work in the area edsd behat under edd behat-2 safely cartage of st pole sp-55 11 & pcc pole 8.5 mtr long from esc, sre to the site of work including loading unloading at both ends. ( dist. up to 40 km. ) 3 safely cartage of other complete material and ( except st poles & pcc pole ) xlpe cable from esc, sre to j.e. store / contractor store / dumping place / other place to local dumping ground or 11 kv s / s & other place thanthe site of work including loading unloading at both ends. ( dist. up to 40 km. ) 4 erection of single support on st / pcc poles up to 11 mtr & 8.5 mtrlong with complete fitting of all accessories of11 kv as per respo specification. 5 laying, lifting, stringing, sagging jumpring & binding of acsr rabbit conductor for 11 kv line as per respo specification including complete. 6 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 7 providing& fixing of f- clampspcc / st poles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 8 earthing of poles by earthing rod 20x2500 mm as per respo specification. 9 laying of 3x20 sq.mm. xlpe cable, 11 kv ct pt unit to 11 kv philphar proff metering cubicle. 10 providing of 11 kv heat shrinkable jointing kitoutdoor of size 3x20sq mm. cable 11 filling of 11 kv heat shrinkable jointing kitof outdoor side ht cable of size 3x20 sqmm. complete in all respect. 12 carriage of 11 kv philphar proff metering cubicle & ct & pt metering unit esc saharanpur to site of work including loading and unloadign at both ends 13 fixing of 11 kv philphar proff metering cubicle and makingthe frame of m.s channal 100x100x6 mm and fitting the same. 14 fixing of ct & pt metering unit as per respo specification. 15 removal and carriage of 11 kv ct & pt metering unit site of work to esc saharanpur including loading and unloadign at both ends 16 grouting of pole as per respo specification.