running contract work in the area of edd-behat-2 safely cartage of st pole sp-55 11 mtr. long from esc, sre to the site of work including loading unloading at both ends. ( dist. up to 30 km. ) 3 safely cartage of other complete material and xlpe cable ( except pcc / st poles ) from esc, sre to j.e. store / contractor store / dumping place / other place to local dumping ground or 33 kv s / s & other place than the site of work including loading unloading at both ends. ( dist. up to 30 km. ) 4 fabrication and erection of double pole on st pole / pcc pole 11 / 8.5 mtr. long with complete fitting of all accessories of 11kv / lt line as per respo specification. 5 safely cartage of pcc pole 8.5 mtr. long from esc, sre to the site of work including loading unloading at both ends. ( dist. up to 30 km. ) 6 erection of single support on pcc / st poles up to 8.5 / 11 mtr long with complete fitting of all accessories of 11 kv / lt as per respo specification. 7 grouting of of pole in size 450x450x1500 mm. in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5 with plinth as per respo specification. 8 earthing of poles by earthing rod 20x2500 mm as per respo specification. 9 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. & with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 10 safe cartage of 25 kva t / f from esc, sre, to the site of work including loading & unloading at both ends. ( dist. upto 25 km. ) 11 safe installation of 25 kva t / f on the double pole with complete fittings including making connections and commissioning. 12 providing & fixing of all type clamp st / pcc poles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 13 laying, lifting, stringing, sagging jumpring & binding of acsr rebbit conductor for 11 kv line as per respo specification including complete. 14 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductor for 11 kv line as per respo specification including complete. 15 laying of 11 kv xlpe cable 3x185 sq.mm into existing trench and after laying the trench should be covered with laying of bricks and filling of earth with ramming and filling the cable jointingkit indoor and outdoor type properly. 16 provinding and filling of 11 kv heat shrinkable jointing kit of outdoor side ht cable of size 3x185mm. complete in all respect. 17 carriage of 11 kv philphar proff metering cubicle esc saharanpur to site of work including loading and unloadign at both ends 18 fixing of 11 kv philphar proff metering cubicle and making the frame of m.s channal 100x100x6 mm and fitting the same. 19 fixing of ct / pt unit on the d / p as per respo specification 20 removal of guarder pole scrap, m.s angle scrap and weasel conductor and ct / pt unit from the existing lines with making roll of conductor and shifting the same to esc, sre / j.e ( store ) including loading and unloading at both ends.