work for breakdown under edd-i baruat-1 on site lt / ht replacement of broken damaged pcc / stp new. loading / reaching the site from the storage center / baghpat / meerut for erecting the pole, erecting the pole by digging a pit, sagging the wires by putting clamps, cross arm, insulator etc. on the pole. ( including pole grouting ) new pole ( pcc / stp ) to be installed in mid span to raise hanging wires / ab cable at the site loading / transporting the pole from storage center / bagpat / meerut to the site erecting the pole by digging a pit, clamp on the pole, cross to start the power supply by sagging the wires by using arm insulators etc. ( including pole grouting ) 3 4 5 pole repair work by welding additional channel / angle / iron strip to the st pole ( 09 m / 11 m / 13 m ) which is damaged due to corrosion etc. near the ground at site ( necessary channel / angle / strip payable by the tenderer ) tightening per span by pulling loose wire / ab cable / new wire ( lt line / ht line ) and maintaining safe ground clearance. the work of straightening the pole by filling the ballast / boulder / packing in the root and tightening the stay wire to straighten the pole diagonally. 2 on lt / 11kv / 33kv line, the work of starting power supply from the clear line by cutting / pruning of covered tree branches. removal of damaged cable box of 33kv / 11kv cable by disconnecting it from the pole, peeling the cable and removing carbon and filling new cable box. and starting the power supply ( payable by the cable box department ) for special purpose / as per requirement. plastic paper wrapping to a height of 8 feet from the ground to insulate the poles from possible current ( necessary plastic paper / tape etc. payable by the tenderer ) . chemical earthing work as required. ( material payable by the tenderer ) guarding of ht lines as per requirement to prevent electrical accident. ( payable by material department ) fencing of 250 and 400 kva open transformers with boss as required. ( about 08 feet high ) for the construction of double pole, transporting 02 nos pole, stay wire and other fitting material from storage center / baghpat / meerut to the site ( including loading unloading ) digging the pit, erecting the pole and installing the fittings to prepare the double pole ( decentralized material payable by the tenderer ) ( pole grouting