tender for work for breakdown edsd-i baraut under edd-i baraut-lt / ht at site replacement of broken damaged pcc / stp new | for pole installation, loading of pole from storage center / baghpat / meerut / reaching the site, erecting the pole by digging a pit, installing clamps, cross arms, insulators etc. on the pole and starting the power supply by sagging the wires. ( including grouting of pole ) installation of new pole ( pcc / stp ) in mid-span for raising hanging wires / ab cable at site. loading of pole from storage center / baghpat / meerut. starting the power supply by fitting arm insulators etc. by sagging wires. ( including grouting of pole ) 3 pole repair work by welding additional channel / angle / iron strip to st pole ( 09m / 11m / 13m ) getting damaged due to corrosion etc near the ground near the site. ( required channel / angle / strip to be paid by the tenderer ) 4 pulling loose wire / ab cable / new wire ( lt line / ht line ) per span tightening and maintaining safe ground clearance. work of straightening the pole by filling ballast / boulder / packing in the root and tightening the staywire for straightening the pole by pulling it diagonally. 6 tree branches covered on lt / 11 kv / 33 kv line , the work of starting power supply from clear line after harvesting / sorting. unloading the damaged cable box of 33 kv / 11 kv cable from the pole stripping, peeling off the cable, releasing the carbon and filling the new cable box and starting the power supply ( payable by the cable box department ) purpose specific / as per requirement s. wrapping of plastic paper up to a height of 3 feet from the ground to insulate the t. poles from possible current. ( necessary plastic paper / tape etc. to be paid by the tenderer ) work of chemical earthing as per requirement. ( material to be paid by the tenderer ) guarding of ht lines as required to prevent electrical accidents. work to do ( payable by material department ) , work of fencing of 250 and 400 kva transformers kept in the open with boss as per requirement. ( about 08 feet high ) for construction of double pole, 02 nos. pole, stay wire and other fitting material to be delivered from storage center / baghpat / meerut to work site ( including loading and unloading ) , erecting pole by digging pit and fitting double pole. fabrication ( decentralized material to be paid by the tenderer ) ( grouting of poles )