work of running contract business plan against passed package / linkage. edsd rampur maniharan-2 safe cartage ofpcc poles up to 8.5 / 9 / 13 mtr. from esc, sre / je store to site of work at various sites including loading & unloading at both ends. ( dist.up to 50 km. ) 3 safely cartage of other complete line material ( except pcc / st poles ) from esc, sre je store to site of work at various sitesincluding loading, unloading at both ends. ( dist.app. 0 to 50 km. ) 4 safe cartage of 25 / 63 / 100 kva t / f from esc, sre, to the site of work including loading & unloading at both ends. ( dist. upto 50 km. ) 5 safe cartage of 250 kva t / f from esc, sre, to the site of work including loading & unloading at both ends. ( dist. upto 50 km. ) 6 erection of single support onpcc poles up to 8.5 / 9 / 13 mtrlong with complete fitting of all accessories of11 kv / lt line.as per respo specification. 7 erection of double on pcc poles up to 8.5 / 9 / 13 mtr longwith complete fitting with all accessories as per respo specification. 8 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 9 providing & fixing of lt clamp with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 10 providing of lt shekel insulator of size 100x115mm 11 providing ofnuts & bolts for lt shekel insulator of size 180x19mm half threading. 12 providing& fixing of x-arm holding clamps pccpoles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 13 providing & fixing of f-bracketspccpoles with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 14 providing & fixing of double pole clamp on pcc poles with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 15 opening of consumer cable connections for lt line then sagging, binding, jumpering and reconnection of cable of consumer. 16 removal of old damaged weasel conductorfrom the existing 11kv, lt lines with making roll of conductor and shifting the same to esc, sre / j.e ( store ) including loading and unloading at both ends. 17 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductor for 11kv / lt line as per respo specification including complete. 18 laying, lifting, stringing, sagging jumpring & binding of acsr dog conductor for 11kv / lt line as per respo specification including complete. 19 earthing of poles by earthing rod as per respo specification. 20 removal of 25 / 63 / 100 kva t / f from the existing d / p after opening ht & lt connection and with shifting the t / f from the site to esc, sre / je store with loading & unloading at both ends. 21 safe installation of 25 / 63 / 100 kva t / f on the double pole with complete fittings including making connections and commissioning. 22 construction of plinth for installation of 250 kva t / fof size 1.5x1.5x1.5 mtr. made of 9 thick wall in all the four sides with 6 thick rcc top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall . 23 safe installation of 250 kva t / f on the plinth with complete fittings including making connections and commissioning. 24 laying and making connections of lt pvc / xlpe cable 3.5x70sq.mm. / 3.5x150 / 1x240 sq.mm. from t / f to double pole ( approx to 20 mtr ) . 25 tightening of loose stay including opening, binding and nozzling of stay wire. 26 straightening of tilted pcc pole / st pole up to 13 mtr.of 11 kv & lt lines with opening, binding and jumpering of conductor. 27 re-strengthening of tilted d / p ( pcc poles ) with removing of t / f along with complete fitting and refitting of complete fitting after re-strengthening of tilted double pole. 28 replacement of broken / damaged disc insulators 29 replacement of broken / damaged pin insulators 30 re-sagging ofloose conductor of 11 kv / lt line with opening binding & re-bindingwith jumpring. 31 off shooting of tree branches touching the 11 kv / lt line.