tender for by the office letter no. 1202 dated 05.03.2025 of executive engineer, electricity distribution division, kiratpur, various works to be done in relation to package numbers d-128, 129, 142, 144, 164, 165, 195, 206, 211, 213, 241, 247, 270, 275, 276, 280, 281, 294, 295, 300, 305, 322, 336, 366, 393, 394, 402 and 05/2024-25 under the deposit scheme in the jurisdiction of his section, the work of getting done through an external agency under the deposit scheme. - safe carriage of the following material from store centre, bijnor to work site including loading & unloading. 2 11 mtr. st pole, sp-55 pole 3 pcc pole 8.5 mtr long 4 lt abc (1x16+1x25) sqmm 5 lt abc (3x50+1x35+1x16) sqmm 6 lt abc (3x95+1x70+1x16) sqmm 7 11 kv steel cross arm v type 8 tee of channel 100x50x1240 mm 9 stay set complete 10 earthing rod complete 11 ms angle 12 substaion angle 13 11 kv pin insulator with nuts 14 11 kv dics insulator with fittting 15 acsr weassal conductor 16 10 kva tf 17 25 kva tf 18 63 kva tf 19 gi wire 6 swg for guarding 20 11 metering cubical pole mouted 21 11 kv ctpt unit 22 top channal 125x65 mm with clamp 3.2 mtr lone 23 dropper channal 24 distribution box 1 phase 25 supply of following material including freight and insurance charges as per resspo norms. 26 holding clamp 27 f-clamp 28 lt clamp 29 i hook 30 suspension clamp 31 ms bolts nuts 32 dead end clamp 33 lt shackle insulator 34 stone pad 35 installation of the following material as per respo manual and direction of the engineer incharge (complete in all respect) 36 fabrication of tee channel /top/gaurding /sub station angle bracing 37 digging of pits of pcc/st pole as per resspo norm. 38 erection ofst/pcc pole lt/ht line with all accessories as per resspo norms 39 laying of lifting sagging & binding properly of ab conductor suitable for lt line (16/50/95 sqmm) 40 laying of lifting sagging & binding properly of acsr weassal/ rabbit conductor suitable for ht 41 grouting of st/pcc pole cement & bricks ballast 42 grouting of stay set in 1:4:8 cement and brick ballast and nozzling of stay wire 43 erection of top/tee/dropper channel/substaion angle/ m s angle 44 errection of 11 kv metering cubical 45 errection of 11 kv ctpt unit 46 erection of pole earthing with grouting as per resspo norms 47 erection ofdouble pole with all accessories as per resspo norms 48 erection of disc fitting with insulator 49 erection of gourding 50 erection of distribution box 51 erection of 11 kv composit polimer pin insulator with pin 52 recivedback cartage of following materialfrom work site to je storewith loading & unloading at both ends. 53 dismanting of pcc /st pole 54 dismantling of acsr weaselconductor /rabbit conductor 55 dismental of other steelscrap