work of capacity increasing of distribution transformers, installation of new distribution transformers, construction of new lt line, construction and division of 11 kv line, new 11kv vcb, work related to establishment of kv and strengthening of 11 kv and lt lines under system strengthening in business plan 2023-24 under edd-iind, bijnor- 1 safe carriage of the following material from store centre, bijnor to work site including loading & unloading at both ends. 2 pcc pole 8.5 mtr. long 3 63 kv t/f 4 100 kv t/f 5 lt abc (3x95+1x70+1x16) 6 acsr weasal conductor 7 discinsulator 8 pininsulator with pin 9 11 kv vcb incoming ctr 600/300/5a, 350 mva, 24 volt 10 11 kv vcb outgoing ctr 200/100/5a, 350 mva 11 supply of following material including freight and insurance charges as per resspo norms. 12 sub-station angle 13 tee channel 14 top channel 15 dropper channel 16 complete stay 17 complete earthing 18 11 kv fuse set 19 3 phase d. box set 20 suspension clamp with 1 hook installed 21 clamp holding/guarding of top dropper 22 m/s nuts bolts 23 locks for distribution.box 24 stone pad 25 end caps for lt abc 26 transformer mobile trolly suitable for 400 kva with fencing as per elcosed drawing/gtp. 27 control cable 4x2.5 sqmm 28 control cable 2x2.5 sqmm 29 installation of the following material as per respo manual and direction of the engineer incharge (complete in all respect) 30 digging of pits of pcc pole as per resspo norm. 31 erection of pcc pole 8.5 mtr long lt line with all accessories as per resspo norms 32 erection of d/p 8.5 mtr long with all accessories as per resspo norms 33 laying of lifting sagging & binding properly of acsr weasal conductor suitable for 11 kv line 34 laying of lifting sagging & binding properly of ab conductor suitable for lt line 35 laying of control cable 4x2.5 sqmm with proper connection 36 laying of control cable 2x2.5 sqmm with proper connection 37 mounting of 100/63 kva t/f proper ht/lt connection 38 grouting of pcc pole cement & bricks ballast 39 grouting of stay set in 1:4:8 cement and brick ballast and nozzling of stay wire 40 erection of top & dropper channel 41 erection of ms substaion angle 65x65x6 mm with clamp 42 erection of ms t off channel 100x1250x50 mm with clamp 43 erection of pole earthing with grouting as per resspo norms 44 erection of disc fitting with insulator 45 erection of 11 kv composit polimer pin insulator with pin 46 erection of 11 kv incoming vcb panel with proper ht connection as per resspo norms 47 erection of 11 kv outgoing vcb panel with proper ht connection as per resspo norms 48 erection of 3 phase d. box set as per resspo norms 49 erection of11 fuse set as per resspo norms 50 dismentallingand back cartage of following materialfrom work site to store centre bijnor with loading & unloading at both ends. 51 oldvcb withcontrol panel