tender for work to be done under deposit scheme head against various packages under electricity distribution section ii, etawah. - carriage of pcc pole from store center kunera etawah to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. 2 11 mtrs. long st pole 3 8.5 mtrs. long pcc pole 4 line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel, different type of clamps and other required material 5 acsr weasel conductor 6 11 kv 3x185 sqmm xlpe cable 7 33 kv ht 3x120 sqmm xlpe cable 8 11 kv ct/pt pole mounted unit 10/5a 9 3x95+1x70+1x16 sqmm abc cable 10 63 kva transformer 11 25 kva transformer 12 erection ofsinglesupportbyst/pcc pole includingfixingcompleteht/lt fittingsasperresspomunualincludingthecostoflabour, t&p and carrier etc. required for proper completion of work. 13 groutingofsinglesupport st/pcc pole asperresspomanual including of the cost of labour,t&p and carrier etc. required for proper completion of work. the support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 14 erection & grouting ofdouble pole including fixing completeht/ltfittingasperresspomanualincludingthe cost of labour, t&p and carrier etc. required for proper completion of work. the support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 15 laying, sagging, stringing, binding & jumpering of acsr weasel conductor on the newly erected pole asperrespomanualandasperdirectionofsupervising engineer,includingthecostofarrangementoflabour,t&p carrier etc. required for proper completion of work. 16 laying, sagging, stringing, binding & jumpering of lt ab cable 3x50 sqmm on the newly erected pole asperrespomanualandasperdirectionofsupervising engineer,includingthecostofarrangementoflabour,t&p carrier etc. required for proper completion of work. 17 laying, sagging, stringing, binding & jumpering of33 kv ht xlpe cable 3x120 sqmmincludingfixingof allaccessoriesasper resspo manual and as per direction ofsupervising engineer, includingthecostofarrangementoflabour,t&pcarrieretc. required for proper completion of work. : 18 erection and grouting of stay set including the work of nozzling etc. as per respo manual and also including the cost of arrangement of allgrouting material, labour, t&p etc. required for proper completion of work as per resspo manual. 19 fixing &connectingofearthingrod complete as as perresspomanual includingthecostoflabour,t&petc.requiredforproper completion of work. 20 mounting of 25/63 kva transformer on the single pole/double pole/plinth structures and connections thereof. 21 guardingof ht/lt 11 kv line with gi wire as per respo norms. includingthe costofarrangementoflabour, t&p etc required for proper completion of work. 22 safecarriageof11 kv ct/pt pole mountingunitanditsproper installationondoublepooleafterfixingofchannelwithm.s. clamps and nuts & bolts for holding the channel angle etc. the unitbodyshallbeearthedbyconnectingm.s.stripofsutaible size finallyconnectedtoearthingrod.11 kvline shall be connected tounit as per instructions of sdo / ae(m). the m.s. strip & earth rod shall be included in the scope of work. 23 digging, laying and filling of 11 kv 3x185 sqmm xlpe cable including the cost of cable hoisting and making loops/ hdpe pipe/clamps as per respo or direction of supervising engineer. arrangement of brick, sand, labour and t&p provide by contractor at his own cost. 24 fillingof 3x120/3x185 sqmm heat shrinkable jointing kit (indoor/outdoor) type. including cable hoisting jumfering work etc. cable jointing kit will be provided by contractor at his own cost. 25 installation & fixing of following accessories. includingthecostoflabour, t&p and carrier etc. required for proper completion of work. 26 polymer pin insulator 27 11 kv disc insulator 28 top channel 100x50x5x2240 mm 29 dropper channel 30 11 kv v type cross arm 31 cross arm holding clamp 32 stay wire 7/10 swg. 33 11 kv fuse set 34 11 kv f clamp for 8.5 pcc pole 35 t/f base angle 65x65x6x2028 mm 36 dp clamp for 8.5 pcc pole 37 nut & bolt 38 t-off channel 39 11 kv tpmo 40 i-hook with clamp