tender for renovation of incubation center at icar-ciwa bhubaneswar; 1 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 2 1.00 m x0.75 m x 0.10 m 3 10.0m x 1.20 m x 0.10 m 4 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and accessplatform 5 1.00 m x 0.85 m 6 10.00 m x 1.30 m 7 steel reinforcement for r.c.c. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.hot rolled deformed bars 8 steel reinforcement for r.c.c. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.hot rolled deformed bars 9 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorv level.cement mortar 1:4 (1 cement :4 coarse sand) 10 2 x 0.75 m x 1.00 m 11 4 x 1.20 m x 0.80 m 12 20 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) 13 2 x 2 x 0.75m x 1.00 m 14 2 x 4 x 1.20 mx 0.80 m 15 5 x 1.20 x 0.15 16 1.00 m x 0.75 m 17 10.00 m x 1.20 m 18 10.00m x 0.10 m 19 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. granite stone slab colour black, cherry/ruby redarea of slab over 0.50 sqm 20 1.00 m x 0.75 m 21 2.50m x 0.10 22 10.00 m x 1.20 m 23 12.40 m x 0.10 m 24 providing and fixing wall hanging cupboard made out of 19mm thick water proof and termite proof plyboard (century/austin/mayur). the cupboard will be provided with storage space as per instruction and requirement with two/three tier rack system. the exposed surface of the cupboard will be provided with 1mm thick glossy/mat finished sunmica and inside surface with 0.8mm thick off white surmica. the all hinges of the door system will be pneumatic of godrej/hettich made. the locking and handle systemshould be godrej/hettich made of high class ss. if necessary lipping teak beat is to be provided on peripheral surface as per instruction and requirement. sectional size of cupboard will be 0.6m x 0.45mn 25 3 nos x 3 m 26 2 x3 m 27 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) 28 10 m x 0.8 m =8.0 m2 @6.4 kg/m2 29 providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required including all fittingwith powder coated aluminium (minimum thickness of powder coating 50 micron) 30 10m x 0.8 m =8.0 m2 @ 6.8 kg/m2 31 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): with frosted glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) 32 10 m x 0.8 m 33 supply and fitting of display unit made up of 19 mm thick water proof and termite proof plyboard (century /austin/mayur make) of required dimension with pasting of 4 mm thick veneer sheet on exposed surface of approved make and colour and the internal surface with 8 mm thick high glass sunmica of approved make. the front surface will be made up of 8 mm thick, clear toughened glass of approved make to expose the internal surface/space fully visible and will movable over upvc channel in the front surface. the all fitting such as handle, knob, castor- wheel, channel, hinges, locketc. will be of stainless steel made of approved make such as godrej/hettich. the entire exposed surface will be painted withhigh glass acrylic paint.size of display unit. 34 2400 mm x2100 mm with internal depth 450 mm 35 providing and fixingfactory made upvc frame of sectional area 70 mm x 50 mm with wall thickness 2.3 ± 0.2 mm comprising of upvcmulti charmbered frame built up with sash ( 40 mm x 50 mm) extruded profile duly reinforced with 1.60± 0.2mm thick galvanized mild steel section made from rool framingprocess of required length (shape & size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocking, epdm gasket, wool pile, zinc alloy (white powder coated), touch lock with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg),gi fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screw etc. profile of frame and sash shall be mitred cut and fusion welded at all corner including drilling of holes for fixing hardware etc. after fixing of frame the gap between frame and adjacent finished will shall be filled with weather proofing silicon sealautover backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. the bottom half of the section should be fixed with 12 mm thick prelaminated particle board conforming to 12823 grade i type ii in the partitioning frames with cp brass/ stainless steel screw etc. and top half of the section should be fixed with 8 mm thick float/frosted glass as per the architectural design.. all hardware fitting suchas rollers, handles, locking arrangement must of approved make (godrej of hettich) 36 (i) fixed part 37 5 x 2.50 m x 2.4 m 38 6 x 2.5 m x 2.40 m 39 (ii) door part / rolling part 40 5 x 2.40m x1.20 m