tender for estimate for 5 hp pump connection for agr purpose (kmy scheme) at village amon (applicant mrs. sangita chauhan/narendra) under baktara d/c of (oandm) dn. budni; 1 140 kg.,8.0 mtrs. long pcc pole 2 11/0.4 kv distribution transformer 25 kva (conventional) (aluminium wound)(rep-bgp) 3 aaac rabbit conductor 0.05 sq. inch. (55 sq.mm. al.eq.) 4 xlpe cable 1 core unarmoured 70 sqmm aluminium conductor 1100 volts 5 11 kv pin insulator polymer composit (5 kn) 6 11 kv(45kn) composite polymer disc insulators 7 11 kv strain hardware (t&c type) fittings 8 m s channel 75x40x6 mm 9 m s channel 100x50x6 mm 10 m.s.angle 50x50x6 mm 11 m s angle 65x65x6 mm 12 m.s.flat 50x6 mm 13 11 kv d.o. fuse unit polymer type 14 9 kv gapless type(5 ka) polymer lightening arrestor 15 g.i. wire 3.15 mm. (10 swg) 16 bi-metallic clamps suitable for 12mm dia stud and 80sqmm aaac 17 bi-metallic clamps distribution transformers bushing 18 red oxide paint 19 aluminium paint 20 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 21 anti climbing devices ( barbed wire 2.24 mm dia, 14 swg) 22 m.s.nuts with bolts 23 jointing sleeves suitable for rabbit (55sq.mm.al. eq. ) aaac conductor 24 aluminium binding wire and tape 25 stay insulators 90x65mm 26 back filling of poles with boulders. 27 ms strain plate 65x8mm 250mm long 28 stay set complete without stay wire 16 mm. (painted) 29 concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay 30 stay set 20 mm. complete without stay wire (painted) 31 concreting of structures & foundation (1:3:6) 32 danger boards enamelled 11 kv 33 danger boards enamelled 33 kv 34 stone block/pre cast block for base pedding(450x450x75mm) 35 earthing set (40mm , 3 meter gi pipe , gi wire, earthing clmap and nut bolt) 36 lt robust fuse unit 37 complete jumpering of dtr 38 additional erection charge 39 labour charges & all fabrication charges (stc sub division will provide the raw material like m.s. angle, m.s. channel, m.s. flat, etc. to the contractor and the contractor will fabricate the itemslike v-cross arm, top clamp, d.c. channel, clamp, etc. as per site condition. those fabrication charges are included in the labour charges.) no extra amount will be paid. 40 transportation charges for all equipments & materialsfrom area store to site & site to area store bhopal 41 gst on transportation @5% 42 gst on (contractor side material + labour) @18%