estimate for 11 kv interconnection lahore pump feeder under ladkui d/c under bhairunda dn. - 140 kg.,8.0 mtrs. long pcc pole 2 aaac raccoon conductor 0.075 sq. inch (80 sq.mm. al.eq.) 3 11 kv pin insulator polymer composit (5 kn) 4 11 kv(45kn) composite polymer disc insulators 5 11 kv strain hardware (t&c type) fittings 6 m s channel 100x50x6 mm 7 m.s.angle 50x50x6 mm 8 m s angle 65x65x6 mm 9 g.i. wire 3.15 mm. (10 swg) 10 m.s.flat 50x6 mm 11 red oxide paint 12 aluminium paint 13 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 14 earthing for pcc pole 4.00 mm-8 swg g.i wire- 0.8 kg, per pole 15 danger boards enamelled 11 kv 16 m.s.nuts with bolts 17 jointing sleeves suitable for rabbit (55sq.mm.al. eq. ) aaac conductor 18 aluminium binding wire and tape 19 back filling of poles with boulders. 20 g.i. wires 4.0 mm. (8 swg) 21 stay wire 7/3.15 mm.(7/10 swg) 22 stay set complete without stay wire 16 mm. (painted) 23 concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay 24 concreting of structures & foundation (1:3:6) 25 stay insulators 90x65mm 26 anti climbing devices ( barbed wire 2.24 mm dia, 14 swg) 27 stone block/pre cast block for base pedding(450x450x75mm) 28 labour charges & all fabrication charges (stc sub division will provide the raw material like m.s. angle, m.s. channel, m.s. flat, etc. to the contractor and the contractor will fabricate the itemslike v-cross arm, top clamp, d.c. channel, clamp, etc. as per site condition. those fabrication charges are included in the labour charges.) no extra amount will be paid. 29 transportation charges for all equipments & materialsfrom area store to site & site to area store bhopal