tender for lan wiring work at department of mechanical engineering.; 1 providing, installation testing & commissioning of rack and other components 42 u server rack floor standing with front door glass and side panel are removable with following accessories as viz.cmh -10x05 mounting hardware, set of 10 cage nuts/cft-02x01 fan tray. 1u, 2-fan position, with fans top mounted,vertical power distribution unit with 12 x 5/15 sockets round pin, 230 volts ac, 32 amp (electronically controlled circuits for surge & spike protection), cm/1ux05 cable manager, 1u, steel loops, 19/of panduit (pannet)/ systimax/rackom/ d-link/com-rack/ legrand/netrack make with dismanteling ofold (damaged/broken) rack as required including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 2 providing, installation testing & commissioning of rack and other components 12u wall mounting cabinets complete in all respectall respect including standard accessories :1u cable manager (02 nos), hardware packet (1 no) , 4 socket 5 amp. power distribution unit (1 no) roof mounted fan unit (1 no)of panduit (pannet)/ systimax/rackom/ d-link/com-rack/ legrand/netrack make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 3 providing, installation testing & commissioning of cat 6 utp patch panel fully loaded complete in all respect of d-linkl/panduit (pannet)/ systimax/com-rack/rackom/legrand/molex make with dismantling of old patch pannel including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 4 providing, fixing, testing and commissioning of cat 6, utp lan cable of molex/ schneider amp/r&m/finolex/legrand in the existing pvc/ steel conduit/trunking as requiredalongwith punching/crimping & permanet numbering both ends (patch pannels switch side and io port side) anddismanteling of old broken/damaged wiring if any including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 5 providing and fixing of 25mm dia pvc conduit (isi mark) along with the accessories (saddle and flexible must be stainless steel) in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismantling of damaged/ broken old conduitincluding entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 6 providing and fixing of pvc trunking (isi mark)50*150*50 along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismantling of damaged/ broken conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 7 providing and fixing of ms perfrated trunking50*150*50 along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismantling of damaged/ broken conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 8 providing, installation testing and commissioning of cat 6 information outletwith british/american styleface plate having shutter on i/o or face plate to avoid dust of molex/ schneider amp/r&m/finolex/legrand/d-link in the existing pvc/ steel conduit with dismantling of old installed i/o including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 9 providing, installation testing and commissioning ofcat 6 utp patch cord 1mtr- from rack end of molex/ schneider amp/r&m/finolex/legrand/d-linkd make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 10 providing, installation testing and commissioning ofcat 6 utp patch cord 2 mtr- from rack end of molex/ schneider/ amp/r&m/finolex/ d-link/legrand make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 11 shifting of48 core single mode liu from exsiting rack to 42 u (new rack) along with splicing and any other items/service etcincluding entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 12 shifting of15 u rack including punching of 25 nos lan cables on patch pannel including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals.