tender for earth work in excavation for structures as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing removal of slumps and other deleterious material and disposal up to a lead of 50meters dressing of sides and bottom and back filling in trenches with excavated suitable materials. (i) ordinary rock (1) up to 3 m. depth. including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , demolishing reinforced cement concrete work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge , dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , centering and shuttering including strutting, propping etc. and removal of formwork for , lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , suspended floors, roofs, landings, balconies and access platform including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , edges of slabs and breaks in floors and walls under 20 cm wide including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - all work up to plinth level 1:3:6 (20 mm) including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , reinforced cement concrete work in beams, suspended loors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. mild steel and medium tensile steel bars including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , 15mm cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even andsmooth.(iv) cement mortar 1:6 (1cement:6 sand). including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. , removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing plain jaffri door and window shutters including bright or/and black enamelled m.s. butt hinges with necessary screws 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with : second class teak wood including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , hirmachi colour wash on undecorated wall surfaces (two coats) to give an even shade including thoroughly brooming the surfaces to remove all dirt,dust,mortar drops and other foreign matter.including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications painting wood work with deluxe multi surface paint of required shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture , providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. exposed on wall 15 mm dia nominal bore including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 15 mm nominal bore including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931. 15 mm nominal bore including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china wash basin size 550x400 mm with a pair of 15 mm c.p. brass pillar taps including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. flexible pipe 32 mm dia including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing ptmt soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing 100 mm sand cast iron grating for gully trap.including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing uplasticised pvc connection pipe with brass unions 30 cm length 15 mm nominal bore including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing high pressure pvc spigot and socket, waste and ventilating pipes isi marked including fixing with approved adhesive etc. complete.110 mm dia including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion including carriage of materials within all leads and lifts as per the direction of engineer-in-charge. , 110 mm plain bend , 110 mm shoe (plain) , 110 mm collar , 110 mm single tee with door