tender for system augmentation / strengthening work ( under 20 crore yojana ) in the area of edsd edsd chuttmalpur under edd behat-2 safely cartage ofpcc pole 8.5 mtr. long from esc, sre to the site of work including loading unloading at both ends. (dist. up to 25 km.) 3 erection of single support on pcc poles up to 8.5 mtrlong with complete fitting of all accessories of33 kv line as per respo specification 4 safely carriage of line material (except pcc pole)esc sre to site of works through privet vehicle including loading and unloading at both ends. (distance 0 to 25 k.m.) 5 laying lifting stringing & sagging of abc cable size 3x120/3x95 sq.mm. including fixing of all type clamps and connector of all accessories. 6 safe removal of 100/250 kva t/f from site of work to esc sre including loading & unloading at both ends. (dist. upto 25 km.) 7 safe cartage of 250/400 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 25 km.) 8 constriction of plinth for installation of 250/400 kv t/f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick rcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall. 9 safe installation of 250/400 kva t/f on the plinth with complete fittings including making connections and commissioning. 10 fencing of 250/400 kva transformer as per respo specification. 11 pipe/chemical earthing of 250 kva t/f properly. 12 fixing of 3 phase distribution box properly. 13 providing and fixing of brass lug. 14 grouting of stay rods by digging of pits in block 600x600x300 mm & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 swg and fitting the same on the pole including fixing of stay insulator in stay wire. 15 fabrication and erection of d/p on pcc poles/sp55 8.5 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 16 safe cartage of 100 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 25 km.) 17 safe installation of 100 kva t/f on the plinth with complete fittings including making connections and commissioning. 18 earthing of pole by earthing rod 19 providing and fixing of all type clamp with nut & bolt . 20 removal of conductor and other scrap from site of work to esc sre including loading and unloading at both ends. 21 providing and fixing nut and bolts 22 laying of lt cable 1*240/1x400 sq. mm as per respo specification.