tender for system augmentation / strengthening work ( under 20 crore yojana ) in the area of edsd edsd behat under edd behat-2 safely cartage ofst/pcc pole 8.5/11 mtr. long from esc, sre to the site of work including loading unloading at both ends. (dist. up to 25 km.) 3 erection of single support on pcc/st poles up to 8.5/11 mtrlong with complete fitting of all accessories of11 kv line as per respo specification 4 safely carriage of line material (except pcc pole)esc sre to site of works through privet vehicle including loading and unloading at both ends. (distance 0 to 25 k.m.) 5 fabrication and erection of d/p on pcc poles/sp55 8.5/11 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 6 safe cartage of 100 kva t/f from esc,sre to site of work including loading & unloading at both ends. (dist. upto 25 km.) 7 safe installation of 100 kva t/f on the d/p with complete fittings including making connections and commissioning. 8 laying lifting stringing & sagging of abc cable size 3x120/3x95 sq.mm. including fixing of all type clamps and connector of all accessories. 9 safe cartage of 250 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 25 km.) 10 constriction of plinth for installation of 250 kv t/f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick rcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall. 11 safe installation of 250 kva t/f on the plinth with complete fittings including making connections and commissioning. 12 fencing of 250 kva transformer as per respo specification. 13 grouting of stay rods by digging of pits in block 600x600x300 mm & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 swg and fitting the same on the pole including fixing of stay insulator in stay wire. 14 fixing of 3 phase distribution box properly. 15 providing and fixing of lug. 16 laying, lifting, stringing, sagging jump ring & binding of acsr weasel conductor for ht/lt line. 17 grouting and plith of pole 18 safe cartage of fuse set from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 25 km.) 19 safe installation of fuse set on the d/p with complete fittings including making connections and commissioning. 20 providing and fixing of all type clamp with nut & bolt . 21 providing and fixing of stone pad. 22 providing and fixing nut and bolts 23 earthing of pole by earthing rod. 24 laying of lt cable 1*240 sq. mm as per respo specification.