tender for electrification against sanctioned estimate and package under full deposit under edd iii mainpuri, electrification against sanctioned estimate / package no. 356, 363, 382, 402, 404, 405, 411, 414, 426, 427, 444, 446, 448, 451, 452, 453, 454, 455, 456, 459, 461, 469, 470, 471, 481, 489, 490, 491, 494, 495, 496, 497, 501, 502, 503, 504 and 505 / 2023-24 under full deposit under edd-iii, mainpuri, 1 safe carriage of st / pcc pole 11 / 8.5 mtr. long from esc, mainpuri to pit site of work including loading and unloading at both ends. distance approx. 2 safe carriage of small line material from esc, mainpuri to pit site of work including loading and unloading at both ends. distance approx 0 to 30 km. 3 erection of 11 / 8.5 mtr. long st / pcc poles by excavation of earth 1.5 mtr. deep and backfilling properly. 4 grouting of st / pcc pole with cement, sand and stone ballast in ratio 1:4:8 including cost of material i.e. cement, sand and stone ballast as per actual site requirement. 5 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 6 construction of double pole on pcc / stp with all respective material ( as per respo schedule ) etc. 7 laying of acsr weasel / dog for construction of ht / lt lines including stringing and sagging nozelling and binding conductor with insulator. 8 fixing of 11kv cross arm with clamps, nut & bolts. 9 fixing of 11kv f-clamps with nut and bolt 10 fixing of 11kv pin insulator with pin etc. 11 fixing of 11kv disc insulator with fitting. 12 earthing of st poles / pcc pole by using 2.5 meter long earth rod where ever required. 13 safe carriage / mounting of 16kva, 25kva , 63kva and 250 kva transformer with all material ( as per respo schedule ) etc. from esc mainpuri including loading and unloading at both ends, average distance approximate 0 to 30 km. 14 16 kva transformer 15 25kva transformer 16 63kva transformer 17 installation of 250 kva distribution transformer at plinth. 18 laying lt ab cable of ( 1x16+1x25 ) sq.mm. with 5% sag as per estimate. 19 laying lt ab cable of ( 3x50+1x35+1x16 ) sq.mm. with 5% sag as per estimate. 20 laying of 11 kv xlpe cable 3x70 & 3x185 sq.mm. 21 fixing of single phase distribution box with clamp as per estimate. 22 pipe type earthing / chemical earthing as per norms. 23 providing and fixing of barbed wire 24 providing and fixing of g.i. pipe 6 for cable hosting 25 providing & fixing of i / d & o / d hsj kit for 3x70 sq.mm. & 3x185 sq.mm. xlpe cable 26 providing and fixing armoured cable 4x25 sq.mm. for new full deposit connection. 27 providing & fixing of different size clamps. 28 providing & fixing of dead end clamps with eye hook. 29 providing & fixing of pearcing connector. 30 providing & fixing of suspension clamp. 31 providing & fixing of nut & bolt off size by the contractor. 32 providing and fixing danger board with clamp 33 providing and fixing alluminium lug 240 sq.mm. 34 fixing of ms-t off channel with nut and bolts 35 laying and fixing gaurding with angle, clamp, nut&bolts. with gi wire 6 / 10 swg. 09 span 36 fixing of 11 kv pilfer proof metering cubical 20 / 5a