electrification work against sanctioned estimate or package under full deposit under edd iii mainpuri- 1 safe carriage of st / pcc pole 11 / 8.5 mtr. long from esc, mainpuri to pit site of work including loading and unloading at both ends. distance approx 15 km to 50 km. 2 safe carriage of small line material from esc, mainpuri to pit site of work including loading and unloading at both ends. distance approx 15 km to 50 km. 3 erection of 11 / 8.5 mtr. long st / pcc poles by excavation of earth 1.5 mtr. deep and backfilling properly. 4 grouting of st / pcc pole with cement, sand and stone ballast in ratio 1:4:8 including cost of material i.e. cement, sand and stone ballast as per actual site requirement. 5 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 6 laying of acsr weasel / dog for construction of ht / lt lines including stringing and sagging nozelling and binding conductor with insulator. 7 fixing of 11kv cross arm with clamps, nut & bolts. 8 fixing of 11kv f-clamps with nut and bolt 9 fixing of 11kv pin insulator with pin etc. 10 fixing of 11kv disc insulator with fitting. 11 earthing of st poles / pcc pole by using 2.5 meter long earth rod where ever required. 12 safe carriage of 25kva and 63kva transformer from esc mainpuri including loading and unloading at both ends, average distance approx 15 km to 50 km. 13 25kva transformer 14 63kva transformer 15 mounting of 25kva and 63kva transformer on single pole / double pole with all material ( as per respo schedule ) etc. 16 25kva transformer 17 63kva transformer 18 laying lt ab cable of ( 1x16+1x25 ) sq.mm. with 5% sag as per estimate. 19 fixing of single phase / three phase distribution box with clamp as per estimate. 20 fixing of ms top channel ( 100x50x2240 mm. ) & dropper channel ( 100x50x2000 mm. ) with clamp and nut & bolt. 21 providing & fixing of different size clamps. 22 providing & fixing of suspension clamps & i hook. 23 providing & fixing of dead end clamps. 24 installation of 11kv tpmo. 25 providing & fixing of nut & bolt off size by the contractor. 26 drilling of hole in ms channel & angle for d / pole, guarding & t-section. 27 fixing of t-channel with nut and bolts 28 laying and fixing gaurding with angle, clamp, nut&bolts. 29 g.i. wire 6 swg. 30 providing and fixing danger board with clamp 31 providing and fixing stone pad 300x300x75 cm 32 fixing of base angle for transformer size ( 65*65*6 mm. ) 33 providing and fixing armoured cable 4x25 sq.mm. for new full deposit connection. 34 providing & fixing of jointing kit. 35 received back 25 kva transformer site to esc mainpuri