safely cartage of stpoles sp-55, 11 mtr.long fromesc, sreto the site of workincluding loading & unloading at both ends. ( distance upto 40 km. ) 3 safely cartage of complete line material ( except st poles, xlpe cable, vcb, ct&pt unit & mitringcubical ) from esc, sreto the site of work / dumping place / other place to local dumping ground or 33 kv s / s / other place of siteincluding loading & unloading at both ends. ( dist. upto 40 km. ) 4 safely cartage of11 kvxlpe of size 3x120 sq mm cable fromesc, sre to the site of work including loading & unloading at both ends. ( distance upto 40 km. ) 5 safe cartage of 11 kv ct / pt unit from esc sre to the site of work including loading & unloading at both ends. ( dist. upto 40 km. ) 6 safe cartage of11 kv metering cubicalfrom esc sre to the site of work including loading & unloading at both ends. ( dist. upto 40 km. ) 7 safe cartage of11 kv vcbfrom esc sre to the site of work including loading & unloading at both ends. ( dist. upto 40 km. ) 8 erection of single stpoles sp-55, 11 mtr. longwith complete fitting of all accessories of 33 kv line as per respo specifications. 9 fabrication and erection of double pole sp-55, 11 mtr. & sp-72, 13 mtr. long st poles with complete fittingofbracings & other accessories as per respo specifications. 10 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 11 laying, lifting, stringing, sagging jumpering & binding of acsr rabbit conductor on st polefor 11 kv line as per respo specifications. 12 earthing of st poles by earthing rod 20x2500 mm as per respo specifications. 13 concreting of st poles sp-55, 11 mtr.long with cement concreting in bolck of 600x600x1500 mm. in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5 with plinth. 14 providing and fixing x-arm holding clamp, channel & angle clamp, & guarding clamp for st poles made of new ms flat size 50x6 mm. 15 providing and fixingf- bracket / clamp, for st poles made of new ms flat size 50x6 mm. 16 providing and fixingstay clamp, for st poles made of new ms flat size 50x6 mm. 17 providing and fixingbracingclamp, for st poles made of new ms flat size 50x6 mm. 18 providing and fixinge- clampfor st poles made of new ms flat size 50x6 mm. 19 providing and fixing t- channelclampfor st poles made of new ms flat size 50x6 mm. 20 providing and fixing d / p clampfor st poles made of new ms flat size 50x6 mm. 21 providing and fixing guarding clamp for st poles made of new ms flat size 50x6 mm. 22 providing and fixing pg clamp for rbbit conductor. 23 providing and fixing of stone ped 300x300x75 24 providing and fixing ms nuts & bolts & washers off size 25 providing and fixing of gi barbed wire on the each pole. 26 providing and fixing of g.i. pipe 100 mm dia 3.5 mtr. long at the both side of double pole with clamps. 27 providing of hdpe pipe 100 mm dia 28 providing and fixing of number plate with clamp on the each pole. 29 providing and fixing 11 kv danger board withclamp for st poles made of new ms flat size 40x5 mm with nuts & bolts. 30 providingof alluminium paint ( british / asian / enamel paint ) 31 providing ofred oxide paints ( british / asian / enamel paint ) 32 painting ofst poles 11 mtr, sp-55with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing / cleaning of surface as required for proper completion of work. and remaining by aluminium paint including all channels / clamps etc. 33 laying, lifting, stringing, saggingof 11 kv xlpe cable of size 3x120 sq mm on st polefor over hed line as per respo specifications. 34 digging of trench 1.5 mtr. deepand laying of 2 no. parreral hdpe pipe 100 mm dia on 1 meter distance by drill machine. 35 laying of11 kv xlpe cable 3x120sq mm in the hdpe pipe 100 mm dia on 1 meter distance. 36 providing of 11 kv heat shrinkable jointing kitoutdoor & indoor of size 3x120 sq mm. ( denson make, raychem make ) 37 fixing & making of 11 kv cable heat shrinkable terminationskits of size 120 sqmm ofoutdoor & indoor side. 38 guarding of span of 11 kv line on road crossing / river crossing and ht / lt line crossing with g.i. wire as per respo specifications. 39 off shooting of tree branches for clearence of proposed33 kv line. ( approx 5 km line ) 40 safe installation of11 kv ct / pt unit on the double pole with complete fittings including making connections and commissioning. 41 safe installation of11 kv metering cubical in the room with complete fittings including making connections and commissioning. 42 shifting and fixing and installation of new vcb out going panel in control room ats / s complete in all respect and fixing bus bar and cable connection with proper alignment. 43 fabrication charges of angle 44 earthing of11 kv vcb pannel by boring of 60 ft. deep& fixing of 60 ft.g.i. pipe 11 / 2” dia ( jindal class b ) and connecting with g.i. strip of size 40x5 mm and g.i. wire. at bottom of g.i. pipe to the t / f providing of required charcoal & salt in the pipe.