carrying out the various work in a full deposit scheme at various places. town of edd nakur.-2 safe cartage ofpcc poles up to 8.5 mtr. from esc, sre / je store to site of work at various sites including loading & unloading at both ends. ( dist.up to 50 km. ) 3 safe cartage ofpcc poles up to 9 mtr. from esc, sre / je store to site of work at various sites including loading & unloading at both ends. ( dist.up to 50 km. ) 4 safely cartage of other complete line material ( except pcc / st poles ) from esc, sre je store to site of work at various sitesincluding loading, unloading at both ends. ( dist.app. 0 to 50 km. ) 5 erection of single support onpcc poles up to 9 mtrlong with complete fitting of all accessories of11 kv / lt line.as per respo specification. 6 erection of double on pcc poles up to 09 mtr longwith complete fitting with all accessories as per respo specification. 7 erection of single support onpcc poles up to 8.5 mtrlong with complete fitting of all accessories of11 kv / lt line.as per respo specification. 8 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 9 providing & fixing of lt clamp with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 10 providing of lt shekel insulator of size 100x115mm 11 providing ofnuts & bolts for lt shekel insulator of size 180x19mm half threading. 12 providing& fixing of x-arm holding clamps pccpoles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 13 providing & fixing of f-bracketspccpoles with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 14 providing & fixing of double pole clamp on pcc poles with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 15 opening of consumer cable connections for lt line then sagging, binding, jumpering and reconnection of cable of consumer. 16 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductor for 11kv / lt line as per respo specification including complete. 17 laying, lifting, stringing, proper sagging abc cable of size3x50+1x35+1x16sq.mm. including fixing ofall accessories. 18 earthing of poles by earthing rod as per respo specification. 19 laying of 11 kv xlpe cable 3x120 sq.mm into existing trench and after laying the trench should be covered. 20 providing and filling the cable jointing kit indore & outdoor type size 3x120 sq.mm as per respo specification. 21 safely cartage of ct / pt unit from esc store to site of workincluding loading & unloading at both ends 22 safely cartage of 11 kv pilfer proofm meetering quibecable from esc store to site of workincluding loading & unloading at both ends 23 safe installation of ct / pt unit on the double pole with complete fittings including making connections and commissioning 24 groughting of 11 kv pilfer proofm meetering quibecable with cemmented angel chanal and installation with proper connection. 25 fixing of distribution box of single phase / 3-phase on pcc pole with providing suitable clamp and connection above distribution box with abc cable connecting jumpering including with service connection. 26 off shooting of tree branches touching the above 11kv / lt line