improvement of road from dollygunj junction to icmr- 1 providing and applying tack coat using hot straight run bitumen ofgrade vg - 10, including heating the bitumen, spraying the bitumenwith mechanically operated spray unit fitted on bitumen boiler,cleaning and preparing the existing road surface as perspecifications : 2 on bituminous surface @ 0.50 kg / sqm 3 providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge. 4 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 3.50% (percentage by weight of total mix) prepared indrum hot mix plant of 40-60 tph capacity. 5 providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 6 40/50 mm compacted thickness with bitumen of grade vg-30 @ 5.5% (percentage by weight of total mix) and cement @ 3% and waste plastic additive @8% (percentage by weight of aggregate) prepared in drum hot mix plant of 40-60 tph capacity. 7 providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 8 total of a(sum of total amount) 9 05 year maintenance provision 10 for 1styear 0.25% ofrs. 8179244.63 11 for 2nd year 1.00% of 8179244.63 12 for 3rd year 1.50% of rs. 8179244.63 13 for 4th year 2.00% ofrs. 8179244.63 14 for 5th year 2.75% of rs. 8179244.63