tender for repair and retargeting of roads around old hostel blocks at cuh. ; 1 providing and applying tack coat using hot straight run bitumen of grade vg - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :on bituminous surface @ 0.50 kg / sqm 2 providing and applying tack coat using hot straight run bitumen of grade vg - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications: on w.b.m. @ 0.75 kg / sqm 3 providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge. 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 3.50% ( percentage by weight of total mix ) prepared in drum type hot mix plant of 60-90 tph capacity. 4 providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 40 / 50 mm compacted thickness with bitumen of grade vg-30 @ 5.5% ( percentage by weight of total mix ) and lime filler @ 3% ( percentage by weight of aggregate ) prepared in batch type hot mix plant of 100-120 tph capacity. 5 painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to is: 164, on bituminous surface in white / yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. new work ( two or more coats )